wireguard-linux/drivers/net/ethernet/toshiba/ps3_gelic_net.c, branch stable

net: ps3_gelic_net: handle skb allocation failures

2025-11-18T11:31:09Z

Handle skb allocation failures in RX path, to avoid NULL pointer dereference and RX stalls under memory pressure. If the refill fails with -ENOMEM, complete napi polling and wake up later to retry via timer. Also explicitly re-enable RX DMA after oom, so the dmac doesn't remain stopped in this situation. Previously, memory pressure could lead to skb allocation failures and subsequent Oops like: Oops: Kernel access of bad area, sig: 11 [#2] Hardware name: SonyPS3 Cell Broadband Engine 0x701000 PS3 NIP [c0003d0000065900] gelic_net_poll+0x6c/0x2d0 [ps3_gelic] (unreliable) LR [c0003d00000659c4] gelic_net_poll+0x130/0x2d0 [ps3_gelic] Call Trace: gelic_net_poll+0x130/0x2d0 [ps3_gelic] (unreliable) __napi_poll+0x44/0x168 net_rx_action+0x178/0x290 Steps to reproduce the issue: 1. Start a continuous network traffic, like scp of a 20GB file 2. Inject failslab errors using the kernel fault injection: echo -1 > /sys/kernel/debug/failslab/times echo 30 > /sys/kernel/debug/failslab/interval echo 100 > /sys/kernel/debug/failslab/probability 3. After some time, traces start to appear, kernel Oopses and the system stops Step 2 is not always necessary, as it is usually already triggered by the transfer of a big enough file. Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3") Signed-off-by: Florian Fuchs Link: https://patch.msgid.link/20251113181000.3914980-1-fuchsfl@gmail.com Signed-off-by: Paolo Abeni

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-02-29T22:24:56Z

Cross-merge networking fixes after downstream PR. Conflicts: net/mptcp/protocol.c adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket") 9426ce476a70 ("mptcp: annotate lockless access for RX path fields") https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/ Adjacent changes: drivers/dpll/dpll_core.c 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()") e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order") drivers/net/veth.c 1ce7d306ea63 ("veth: try harder when allocating queue memory") 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") drivers/net/wireless/intel/iwlwifi/mvm/d3.c 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") 78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists") net/wireless/nl80211.c f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change") 414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately") Signed-off-by: Jakub Kicinski

ps3/gelic: minor Kernel Doc corrections

2024-02-24T00:23:50Z

* Update the Kernel Doc for gelic_descr_set_tx_cmdstat() and gelic_net_setup_netdev() so that documented name and the actual name of the function match. * Move define of GELIC_ALIGN() so that it is no longer between gelic_alloc_card_net() and it's Kernel Doc. * Document netdev parameter of gelic_alloc_card_net() in a way consistent to the documentation of other netdev parameters in this file. Addresses the following warnings flagged by ./scripts/kernel-doc -none: .../ps3_gelic_net.c:711: warning: expecting prototype for gelic_net_set_txdescr_cmdstat(). Prototype was for gelic_descr_set_tx_cmdstat() instead .../ps3_gelic_net.c:1474: warning: expecting prototype for gelic_ether_setup_netdev(). Prototype was for gelic_net_setup_netdev() instead .../ps3_gelic_net.c:1528: warning: expecting prototype for gelic_alloc_card_net(). Prototype was for GELIC_ALIGN() instead .../ps3_gelic_net.c:1531: warning: Function parameter or struct member 'netdev' not described in 'gelic_alloc_card_net' Signed-off-by: Simon Horman Acked-by: Geoff Levand Link: https://lore.kernel.org/r/20240221-ps3-gelic-kdoc-v1-1-7629216d1340@kernel.org Signed-off-by: Jakub Kicinski

ps3/gelic: Fix SKB allocation

2024-02-23T11:59:30Z

Commit 3ce4f9c3fbb3 ("net/ps3_gelic_net: Add gelic_descr structures") of 6.8-rc1 had a copy-and-paste error where the pointer that holds the allocated SKB (struct gelic_descr.skb) was set to NULL after the SKB was allocated. This resulted in a kernel panic when the SKB pointer was accessed. This fix moves the initialization of the gelic_descr to before the SKB is allocated. Reported-by: sambat goson Fixes: 3ce4f9c3fbb3 ("net/ps3_gelic_net: Add gelic_descr structures") Signed-off-by: Geoff Levand Reviewed-by: Simon Horman Signed-off-by: David S. Miller

net/ps3_gelic_net: Add gelic_descr structures

2024-01-02T14:16:08Z

In an effort to make the PS3 gelic driver easier to maintain, create two new structures, struct gelic_hw_regs and struct gelic_chain_link, and replace the corresponding members of struct gelic_descr with the new structures. The new struct gelic_hw_regs holds the register variables used by the gelic hardware device. The new struct gelic_chain_link holds variables used to manage the driver's linked list of gelic descr structures. Signed-off-by: Geoff Levand Signed-off-by: David S. Miller

net/ps3_gelic_net: Use dma_mapping_error

2023-03-20T10:20:40Z

The current Gelic Etherenet driver was checking the return value of its dma_map_single call, and not using the dma_mapping_error() routine. Fixes runtime problems like these: DMA-API: ps3_gelic_driver sb_05: device driver failed to check map error WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:1027 .check_unmap+0x888/0x8dc Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3") Reviewed-by: Alexander Duyck Signed-off-by: Geoff Levand Signed-off-by: David S. Miller

net/ps3_gelic_net: Fix RX sk_buff length

2023-03-20T10:20:40Z

The Gelic Ethernet device needs to have the RX sk_buffs aligned to GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must be a multiple of GELIC_NET_RXBUF_ALIGN. The current Gelic Ethernet driver was not allocating sk_buffs large enough to allow for this alignment. Also, correct the maximum and minimum MTU sizes, and add a new preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME. Fixes various randomly occurring runtime network errors. Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3") Signed-off-by: Geoff Levand Signed-off-by: David S. Miller

net: drop the weight argument from netif_napi_add

2022-09-29T01:57:14Z

We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: ethernet: move from strlcpy with unused retval to strscpy

2022-08-31T21:11:26Z

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang Reviewed-by: Petr Machata # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski

ethernet: fix up ps3_gelic_net.c for "ethernet: use eth_hw_addr_set()"

2021-10-06T01:52:16Z

Another case needing a u8 * cast. Fixes: a96d317fb1a3 ("ethernet: use eth_hw_addr_set()") Signed-off-by: Stephen Rothwell Link: https://lore.kernel.org/r/20211006122315.4e04fb87@canb.auug.org.au Signed-off-by: Jakub Kicinski