| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If we get a 429 response during node registration, use the `Retry-After`
header for backoff instead of the regular exponential backoff.
The rate limiter error is propagated to the user, just like other
registration errors are, e.g.
```
$ tailscale up
backend error: node registration rate limited; will retry after 57s
exit status 1
```
Updates tailscale/corp#39533
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
|
|
Add ExtraRootCAs *x509.CertPool to tsd.System and plumb it through
the control client, noise transport, DERP, and wgengine layers so
that platforms like Android can inject user-installed CA certificates
into Go's TLS verification.
tlsdial.Config now honors base.RootCAs as additional trusted roots,
tried after system roots and before the baked-in LetsEncrypt fallback.
SetConfigExpectedCert gets the same treatment for domain-fronted DERP.
The Android client will set sys.ExtraRootCAs with a pool built from
x509.SystemCertPool + user-installed certs obtained via the Android
KeyStore API, replacing the current SSL_CERT_DIR environment variable
approach.
Updates #8085
Change-Id: Iecce0fd140cd5aa0331b124e55a7045e24d8e0c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
After moving around locks in 4334dfa7d5ccbee1daf5acf30b33557bbca66525,
a data race were made possible.
Introduce an RWlock to the mapSession itself for fetching peers.
Fixes #19260
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
|
|
The disco key subscriber could deadlock in a scenario where a self node
update came through the control path into the mapSession after the disco
key subscriber had taken the lock, but before it had pushed the netmap
change, as both the subscriber and onSelfNodeChanged needs the
controlclient lock.
The subscriber can safely take the mapsession as the changequeue has its
own lock for inserting records, and also checks if the queue has been
closed before inserting.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
|
|
key is learned via tsmp (#19142)
When disco keys are learned on a node that is connected to control and
has a mapSession, wgengine will see the key as having changed, and
assume that any existing connections will need to be reset.
For keys learned via TSMP, the connection should not be reset as that
key is learned via an active wireguard connection. If wgengine resets
that connetion, a 15s timeout will occur.
This change adds a map to track new keys coming in via TSMP, and removes
them from the list of keys that needs to trigger wireguard resets. This
is done with an interface chain from controlclient down via localBackend
to userspaceEngine via the watchdog.
Once a key has been actively used for preventing a wireguard reset, the
key is removed from the map.
If mapSession becomes a long lived process instead of being dependent on
having a connection to control. This interface chain can be removed, and
the event sequence from wrap->controlClient->userspaceEngine, can be
changed to wrap->userspaceEngine->controlClient as we know the map will
not be gunked up with stale TSMP entries.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
|
|
If errors occured, the updater could end up deadlocked.
Closing the done channel rather than adding to it, fixes a deadlock in
the corp tests.
Updates #19111
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
|
|
A client with an active streaming session would break if using the same
client for a non-streaming session. Allow the client 1 streaming and n
non-streaming sessions at the same time.
Fixes #19105
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
|
|
key (#18606)
When a client starts up without being able to connect to control, it
sends its discoKey to other nodes it wants to communicate with over
TSMP. This disco key will be a newer key than the one control knows
about.
If the client that can connect to control gets a full netmap, ensure
that the disco key for the node not connected to control is not
overwritten with the stale key control knows about.
This is implemented through keeping track of mapSession and use that for
the discokey injection if it is available. This ensures that we are not
constantly resetting the wireguard connection when getting the wrong
keys from control.
This is implemented as:
- If the key is received via TSMP:
- Set lastSeen for the peer to now()
- Set online for the peer to false
- When processing new keys, only accept keys where either:
- Peer is online
- lastSeen is newer than existing last seen
If mapSession is not available, as in we are not yet connected to
control, punt down the disco key injection to magicsock.
Ideally, we will want to have mapSession be long lived at some point in
the near future so we only need to inject keys in one location and then
also use that for testing and loading the cache, but that is a yak for
another PR.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
|
|
Currently IP forwarding health check is done on sending MapRequests.
Move ip forwarding to the health service to gain the benefits
of the health tracker and perodic monitoring out of band from
the MapRequest path. ipnlocal now provides a closure to
the health service to provide the check if forwarding is broken.
Removed `skipIPForwardingCheck` from controlclient/direct.go,
it wasn't being used as the comments describe it, that check
has moved to ipnlocal for the closure to the health tracker.
Updates #18976
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
|
|
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Updates #18682
Change-Id: I62f6aa0de2a15ef8c1435032c6aa74a181c25f8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Updates tailscale/corp#9025
Signed-off-by: Will Norris <will@tailscale.com>
|
|
NetmapFromMapResponseForDebug (#17878)
We were seeing some panics from nodes:
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0xd42570]
goroutine 362555 [running]:
tailscale.com/types/persist.PersistView.PrivateNodeKey(...)
tailscale.com@v1.89.0-pre.0.20250926180200-7cbf56345bb3/types/persist/persist_view.go:89
tailscale.com/control/controlclient.NetmapFromMapResponseForDebug({0x1bac2e0, 0xc0a8692380}, {0xc0de5da0c0?}, 0xc0de66fd40)
tailscale.com@v1.89.0-pre.0.20250926180200-7cbf56345bb3/control/controlclient/direct.go:1175 +0x90
tailscale.com/ipn/ipnlocal.handleC2NDebugNetMap(0xc0b3f5af08, {0x1baa520, 0xc0a887b0c0}, 0xc0a869a280)
tailscale.com@v1.89.0-pre.0.20250926180200-7cbf56345bb3/ipn/ipnlocal/c2n.go:186 +0x405
tailscale.com/ipn/ipnlocal.(*LocalBackend).handleC2N(0xc0b3f5af08, {0x1baa520, 0xc0a887b0c0}, 0xc0a869a280)
tailscale.com@v1.89.0-pre.0.20250926180200-7cbf56345bb3/ipn/ipnlocal/c2n.go:121 +0x155
net/http.HandlerFunc.ServeHTTP(0x1bac150?, {0x1baa520?, 0xc0a887b0c0?}, 0xc049d47b20?)
net/http/server.go:2322 +0x29
tailscale.com/control/controlclient.answerC2NPing(0xc0d9808f20, {0x1b90f40, 0xc0c3bd0db0}, 0xc0b1c84ea0, 0xc0a29b3c80)
tailscale.com@v1.89.0-pre.0.20250926180200-7cbf56345bb3/control/controlclient/direct.go:1454 +0x455
tailscale.com/control/controlclient.(*Direct).answerPing(0xc09b173b88, 0xc0a29b3c80)
tailscale.com@v1.89.0-pre.0.20250926180200-7cbf56345bb3/control/controlclient/direct.go:1398 +0x127
created by tailscale.com/control/controlclient.(*Direct).sendMapRequest in goroutine 361922
tailscale.com@v1.89.0-pre.0.20250926180200-7cbf56345bb3/control/controlclient/direct.go:1104 +0x20e5
Updates tailscale/corp#31367
Updates tailscale/corp#32095
Signed-off-by: Paul Scott <408401+icio@users.noreply.github.com>
|
|
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
|
|
to a nodeattr
And fix up the TestAutoUpdateDefaults integration tests as they
weren't testing reality: the DefaultAutoUpdate is supposed to only be
relevant on the first MapResponse in the stream, but the tests weren't
testing that. They were instead injecting a 2nd+ MapResponse.
This changes the test control server to add a hook to modify the first
map response, and then makes the test control when the node goes up
and down to make new map responses.
Also, the test now runs on macOS where the auto-update feature being
disabled would've previously t.Skipped the whole test.
Updates #11502
Change-Id: If2319bd1f71e108b57d79fe500b2acedbc76e1a6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
rotation
Adds the ability to rotate discovery keys on running clients, needed for
testing upcoming disco key distribution changes.
Introduces key.DiscoKey, an atomic container for a disco private key,
public key, and the public key's ShortString, replacing the prior
separate atomic fields.
magicsock.Conn has a new RotateDiscoKey method, and access to this is
provided via localapi and a CLI debug command.
Note that this implementation is primarily for testing as it stands, and
regular use should likely introduce an additional mechanism that allows
the old key to be used for some time, to provide a seamless key rotation
rather than one that invalidates all sessions.
Updates tailscale/corp#34037
Signed-off-by: James Tucker <james@tailscale.com>
|
|
Updates #12639
Change-Id: Ia50b15529bd1c002cdd2c937cdfbe69c06fa2dc8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Includes adding StartPaused, which will be used in a future change to
enable netmap caching testing.
Updates #12639
Change-Id: Iec39915d33b8d75e9b8315b281b1af2f5d13a44a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Updates #17852
Change-Id: I477340fb8e40686870e981ade11cd61597c34a20
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
As a baby step towards eventbus-ifying controlclient, make the
Observer optional.
This also means callers that don't care (like this network lock test,
and some tests in other repos) can omit it, rather than passing in a
no-op one.
Updates #12639
Change-Id: Ibd776b45b4425c08db19405bc3172b238e87da4e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
This reverts commit a760cbe33f4bed64b63c6118808d02b2771ff785.
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
|
|
Temporarily back out the TPM-based hw attestation code while we debug
Windows exceptions.
Updates tailscale/corp#31269
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
|
|
Extend Persist with AttestationKey to record a hardware-backed
attestation key for the node's identity.
Add a flag to tailscaled to allow users to control the use of
hardware-backed keys to bind node identity to individual machines.
Updates tailscale/corp#31269
Change-Id: Idcf40d730a448d85f07f1bebf387f086d4c58be3
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
|
|
Updates #cleanup
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
|
|
Saves ~25 KB.
Updates #12614
Change-Id: I7b976e57819a0d2692824d779c8cc98033df0d30
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
c2n was already a conditional feature, but it didn't have a
feature/c2n directory before (rather, it was using consts + DCE). This
adds it, and moves some code, which removes the httprec dependency.
Also, remove some unnecessary code from our httprec fork.
Updates #12614
Change-Id: I2fbe538e09794c517038e35a694a363312c426a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
In the earlier http2 package migration (1d93bdce20ddd2, #17394) I had
removed Direct.Close's tracking of the connPool, thinking it wasn't
necessary.
Some tests (in another repo) are strict and like it to tear down the
world and wait, to check for leaked goroutines. And they caught this
letting some goroutines idle past Close, even if they'd eventually
close down on their own.
This restores the connPool accounting and the aggressife close.
Updates #17305
Updates #17394
Change-Id: I5fed283a179ff7c3e2be104836bbe58b05130cc7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
health reporting
A recent change (009d702adfa0fc) introduced a deadlock where the
/machine/update-health network request to report the client's health
status update to the control plane was moved to being synchronous
within the eventbus's pump machinery.
I started to instead make the health reporting be async, but then we
realized in the three years since we added that, it's barely been used
and doesn't pay for itself, for how many HTTP requests it makes.
Instead, delete it all and replace it with a c2n handler, which
provides much more helpful information.
Fixes tailscale/corp#32952
Change-Id: I9e8a5458269ebfdda1c752d7bbb8af2780d71b04
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
routes/exit nodes
Saves 262 KB so far. I'm sure I missed some places, but shotizam says
these were the low hanging fruit.
Updates #12614
Change-Id: Ia31c01b454f627e6d0470229aae4e19d615e45e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Maybe it matters? At least globally across all nodes?
Fixes #17343
Change-Id: I3f61758ea37de527e16602ec1a6e453d913b3195
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Saves 352 KB, removing one of our two HTTP/2 implementations linked
into the binary.
Fixes #17305
Updates #15015
Change-Id: I53a04b1f2687dca73c8541949465038b69aa6ade
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
It never launched and I've lost hope of it launching and it's in my
way now, so I guess it's time to say goodbye.
Updates tailscale/corp#4383
Updates #17305
Change-Id: I2eb551d49f2fb062979cc307f284df4b3dfa5956
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Updates #7123
Change-Id: Ie9be6814831f661ad5636afcd51d063a0d7a907d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Saves 168 KB.
Updates #12614
Change-Id: Iaab3ae3efc6ddc7da39629ef13e5ec44976952ba
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Saves 139 KB.
Also Synology support, which I saw had its own large-ish proxy parsing
support on Linux, but support for proxies without Synology proxy
support is reasonable, so I pulled that out as its own thing.
Updates #12614
Change-Id: I22de285a3def7be77fdcf23e2bec7c83c9655593
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Saves 328 KB (2.5%) off the minimal binary.
For IoT devices that don't need MagicDNS (e.g. they don't make
outbound connections), this provides a knob to disable all the DNS
functionality.
Rather than a massive refactor today, this uses constant false values
as a deadcode sledgehammer, guided by shotizam to find the largest DNS
functions which survived deadcode.
A future refactor could make it so that the net/dns/resolver and
publicdns packages don't even show up in the import graph (along with
their imports) but really it's already pretty good looking with just
these consts, so it's not at the top of my list to refactor it more
soon.
Also do the same in a few places with the ACME (cert) functionality,
as I saw those while searching for DNS stuff.
Updates #12614
Change-Id: I8e459f595c2fde68ca16503ff61c8ab339871f97
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Updates #12614
Change-Id: I08e714c83b455df7f538cc99cafe940db936b480
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Also cleans up a a few comments.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
|
|
Updates #cleanup
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
|
|
For debugging purposes, add a new C2N endpoint returning the current
netmap. Optionally, coordination server can send a new "candidate" map
response, which the client will generate a separate netmap for.
Coordination server can later compare two netmaps, detecting unexpected
changes to the client state.
Updates tailscale/corp#32095
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
|
|
This is a small introduction of the eventbus into controlclient that
communicates with mainly ipnlocal. While ipnlocal is a complicated part
of the codebase, the subscribers here are from the perspective of
ipnlocal already called async.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
|
|
This is step 2 of ~4, breaking up #14720 into reviewable chunks, with
the aim to make syspolicy be a build-time configurable feature.
Step 1 was #16984.
In this second step, the util/syspolicy/policyclient package is added
with the policyclient.Client interface. This is the interface that's
always present (regardless of build tags), and is what code around the
tree uses to ask syspolicy/MDM questions.
There are two implementations of policyclient.Client for now:
1) NoPolicyClient, which only returns default values.
2) the unexported, temporary 'globalSyspolicy', which is implemented
in terms of the global functions we wish to later eliminate.
This then starts to plumb around the policyclient.Client to most callers.
Future changes will plumb it more. When the last of the global func
callers are gone, then we can unexport the global functions and make a
proper policyclient.Client type and constructor in the syspolicy
package, removing the globalSyspolicy impl out of tsd.
The final change will sprinkle build tags in a few more places and
lock it in with dependency tests to make sure the dependencies don't
later creep back in.
Updates #16998
Updates #12614
Change-Id: Ib2c93d15c15c1f2b981464099177cd492d50391c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
This is step 1 of ~3, breaking up #14720 into reviewable chunks, with
the aim to make syspolicy be a build-time configurable feature.
In this first (very noisy) step, all the syspolicy string key
constants move to a new constant-only (code-free) package. This will
make future steps more reviewable, without this movement noise.
There are no code or behavior changes here.
The future steps of this series can be seen in #14720: removing global
funcs from syspolicy resolution and using an interface that's plumbed
around instead. Then adding build tags.
Updates #12614
Change-Id: If73bf2c28b9c9b1a408fe868b0b6a25b03eeabd1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Grab a copy under mutex in sendMapRequest.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
|
|
If you had HTTPS_PROXY=https://some-valid-cert.example.com running a
CONNECT proxy, we should've been able to do a TLS CONNECT request to
e.g. controlplane.tailscale.com:443 through that, and I'm pretty sure
it used to work, but refactorings and lack of integration tests made
it regress.
It probably regressed when we added the baked-in LetsEncrypt root cert
validation fallback code, which was testing against the wrong hostname
(the ultimate one, not the one which we were being asked to validate)
Fixes #16222
Change-Id: If014e395f830e2f87f056f588edacad5c15e91bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
* control/controlclient,health,tailcfg: refactor control health messages
Updates tailscale/corp#27759
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
Signed-off-by: Paul Scott <408401+icio@users.noreply.github.com>
Co-authored-by: Paul Scott <408401+icio@users.noreply.github.com>
|
|
requests (#15904)
This handle can be used in tests and debugging to identify the specific
client connection.
Updates tailscale/corp#28368
Change-Id: I48cc573fc0bcf018c66a18e67ad6c4f248fb760c
Signed-off-by: Brian Palmer <brianp@tailscale.com>
|
|
This adds netx.DialFunc, unifying a type we have a bazillion other
places, giving it now a nice short name that's clickable in
editors, etc.
That highlighted that my earlier move (03b47a55c7956) of stuff from
nettest into netx moved too much: it also dragged along the memnet
impl, meaning all users of netx.DialFunc who just wanted netx for the
type definition were instead also pulling in all of memnet.
So move the memnet implementation netx.Network into memnet, a package
we already had.
Then use netx.DialFunc in a bunch of places. I'm sure I missed some.
And plenty remain in other repos, to be updated later.
Updates tailscale/corp#27636
Change-Id: I7296cd4591218e8624e214f8c70dab05fb884e95
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Updates #5794
Change-Id: I1d8b005a1696835c9062545f87b7bab643cfc44d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
updates tailscale/corp#26435
Adds client support for sending audit logs to control via /machine/audit-log.
Specifically implements audit logging for user initiated disconnections.
This will require further work to optimize the peristant storage and exclusion
via build tags for mobile:
tailscale/corp#27011
tailscale/corp#27012
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
|
