| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Updates tailscale/corp#40421
Signed-off-by: Jordan Whited <jordan@tailscale.com>
|
|
By adding a server-global parent bucket. Per-client rate limiting is
subject to the parent bucket if global rate limiting is enabled.
This implementation is experimental, and all related APIs should be
considered unstable.
Updates tailscale/corp#40291
Signed-off-by: Jordan Whited <jordan@tailscale.com>
|
|
And cap WaitN calls to prevent token bucket errors. Frame length is
inclusive of DERP key for FrameSendPacket frames.
Updates tailscale/corp#40171
Signed-off-by: Jordan Whited <jordan@tailscale.com>
|
|
Updates tailscale/corp#40007
Change-Id: I677d3d9e276cb6633a14ac07e4b58ea08e52fac4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Add a --rate-config flag pointing to a JSON file for per-client receive
rate limits (bytes/sec and burst bytes). The config is reloaded on SIGHUP,
updating all existing client connections live. The --per-client-rate-limit
and --per-client-rate-burst flags are removed in favor of the config file.
In derpserver, rate limiting uses an atomic.Pointer[xrate.Limiter] per
client: nil when unlimited or mesh (zero overhead), non-nil when
rate-limited.
Document that clientSet.activeClient Store operations require Server.mu.
Updates tailscale/corp#38509
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
|
|
Updates #cleanup
Signed-off-by: Jordan Whited <jordan@tailscale.com>
|
|
Add server-side per-client bandwidth enforcement using TCP backpressure.
When configured, the server calls WaitN after reading each DERP frame,
which delays the next read, fills the TCP receive buffer, shrinks
the TCP window, and naturally throttles the sender — no packets are dropped.
- Rate limiting is on the receive (inbound) side, which is what an abusive
client controls
- Mesh peers are exempt since they are trusted infrastructure
- The burst size is at least MaxPacketSize (64KB) to ensure a
single max-size frame can always be processed
Also refactors sclient to store a context.Context directly instead of a
done channel, which simplifies the rate limiter's WaitN call.
Flags added to cmd/derper:
--per-client-rate-limit (bytes/sec, default 0 = unlimited)
--per-client-rate-burst (bytes, default 0 = 2x rate limit)
Example for 10Mbps: --per-client-rate-limit=1250000
Updates #38509
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
|
|
Add a new vet analyzer that checks t.Run subtest names don't contain
characters requiring quoting when re-running via "go test -run". This
enforces the style guide rule: don't use spaces or punctuation in
subtest names.
The analyzer flags:
- Direct t.Run calls with string literal names containing spaces,
regex metacharacters, quotes, or other problematic characters
- Table-driven t.Run(tt.name, ...) calls where tt ranges over a
slice/map literal with bad name field values
Also fix all 978 existing violations across 81 test files, replacing
spaces with hyphens and shortening long sentence-like names to concise
hyphenated forms.
Updates #19242
Change-Id: Ib0ad96a111bd8e764582d1d4902fe2599454ab65
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Use bufio.Writer.AvailableBuffer to write the frame header directly
into bufio's internal buffer as a single append+Write, avoiding 5
separate WriteByte calls. Fall back to the existing writeUint32
byte-at-a-time path when the buffer has insufficient space.
```
name old ns/op new ns/op speedup
WriteFrameHeader-8 18.8 7.8 ~2.4x
(0 allocs/op in both)
```
Add TestWriteFrameHeader with correctness
checks, allocation assertions, and coverage of both fast and slow
write paths. Move BenchmarkReadFrameHeader from client_test.go to
derp_test.go alongside BenchmarkWriteFrameHeader, co-located with
the functions under test.
Updates tailscale/corp#38509
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
|
|
Replace byte-at-a-time ReadByte loops with Peek+Discard in the DERP
read path. Peek returns a slice into bufio's internal buffer without
allocating, and Discard advances the read pointer without copying.
Introduce util/bufiox with a BufferedReader interface and ReadFull
helper that uses Peek+copy+Discard as an allocation-free alternative
to io.ReadFull.
- derp.ReadFrameHeader: replace 5× ReadByte with Peek(5)+Discard(5),
reading the frame type and length directly from the peeked slice.
Remove now-unused readUint32 helper.
name old ns/op new ns/op speedup
ReadFrameHeader-8 24.2 12.4 ~2x
(0 allocs/op in both)
- key.NodePublic.ReadRawWithoutAllocating: replace 32× ReadByte with
bufiox.ReadFull. Addresses the "Dear future" comment about switching
away from byte-at-a-time reads once a non-escaping alternative exists.
name old ns/op new ns/op speedup
NodeReadRawWithoutAllocating-8 140 43.6 ~3.2x
(0 allocs/op in both)
- derpserver.handleFramePing: replace io.ReadFull with bufiox.ReadFull.
Updates tailscale/corp#38509
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
|
|
Fixes #19030
Fixes tailscale/corp#38782
Change-Id: I53082059d4012b9765b5596f7023717282132888
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Updates tailscale/corp#38509
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
|
|
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
|
|
Adds an observation point that may identify potentially abusive traffic
patterns at outlier values.
Updates tailscale/corp#24681
Signed-off-by: James Tucker <james@tailscale.com>
|
|
Updates #17852
Change-Id: I477340fb8e40686870e981ade11cd61597c34a20
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Found by staticcheck, the test was calling derphttp.NewClient but not checking
its error result before doing other things to it.
Updates #cleanup
Change-Id: I4ade35a7de7c473571f176e747866bc0ab5774db
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
|
|
Using memnet and synctest removes flakiness caused by real networking
and subtle timing differences.
Additionally, remove the `t.Logf` call inside the server's shutdown
goroutine that was causing a false positive data race detection.
The race detector is flagging a double write during this `t.Logf` call.
This is a common pattern, noted in golang/go#40343 and elsehwere in
this file, where using `t.Logf` after a test has finished can interact
poorly with the test runner.
This is a long-standing issue which became more common after rewriting
this test to use memnet and synctest.
Fixed #17355
Signed-off-by: Alex Chan <alexc@tailscale.com>
|
|
Updates #7123
Change-Id: Ie9be6814831f661ad5636afcd51d063a0d7a907d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Saves 139 KB.
Also Synology support, which I saw had its own large-ish proxy parsing
support on Linux, but support for proxies without Synology proxy
support is reasonable, so I pulled that out as its own thing.
Updates #12614
Change-Id: I22de285a3def7be77fdcf23e2bec7c83c9655593
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
PR #17258 extracted `derp.Server` into `derp/derpserver.Server`.
This followup patch adds the following cleanups:
1. Rename `derp_server*.go` files to `derpserver*.go` to match
the package name.
2. Rename the `derpserver.NewServer` constructor to `derpserver.New`
to reduce stuttering.
3. Remove the unnecessary `derpserver.Conn` type alias.
Updates #17257
Updates #cleanup
Signed-off-by: Simon Law <sfllaw@tailscale.com>
|
|
This exports a number of things from the derp (generic + client) package
to be used by the new derpserver package, as now used by cmd/derper.
And then enough other misc changes to lock in that cmd/tailscaled can
be configured to not bring in tailscale.com/client/local. (The webclient
in particular, even when disabled, was bringing it in, so that's now fixed)
Fixes #17257
Change-Id: I88b6c7958643fb54f386dd900bddf73d2d4d96d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
client/tailscale (#17061)
* cmd/tailscale/cli: use client/local instead of deprecated client/tailscale
Updates tailscale/corp#22748
Signed-off-by: Alex Chan <alexc@tailscale.com>
* derp: use client/local instead of deprecated client/tailscale
Updates tailscale/corp#22748
Signed-off-by: Alex Chan <alexc@tailscale.com>
---------
Signed-off-by: Alex Chan <alexc@tailscale.com>
|
|
Update some logging to help future failures.
Improve test shutdown concurrency issues.
Fixes #16722
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
|
|
When dialed with just an URL and no node, the recent proxy fixes caused
a regression where there was no TLS server name being included.
Updates #16222
Updates #16223
Signed-off-by: James Tucker <james@tailscale.com>
Co-Authored-by: Jordan Whited <jwhited@tailscale.com>
|
|
If you had HTTPS_PROXY=https://some-valid-cert.example.com running a
CONNECT proxy, we should've been able to do a TLS CONNECT request to
e.g. controlplane.tailscale.com:443 through that, and I'm pretty sure
it used to work, but refactorings and lack of integration tests made
it regress.
It probably regressed when we added the baked-in LetsEncrypt root cert
validation fallback code, which was testing against the wrong hostname
(the ultimate one, not the one which we were being asked to validate)
Fixes #16222
Change-Id: If014e395f830e2f87f056f588edacad5c15e91bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
The caller of client.RunWatchConnectionLoop may need to be
aware of errors that occur within loop. Add a channel
that notifies of errors to the caller to allow for
decisions to be make as to the state of the client.
Updates tailscale/corp#25756
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
|
|
During a short period of packet loss, a TCP connection to the home DERP
may be maintained. If no other regions emerge as winners, such as when
all regions but one are avoided/disallowed as candidates, ensure that
the current home region, if still active, is not dropped as the
preferred region until it has failed two keepalives.
Relatedly apply avoid and no measure no home to ICMP and HTTP checks as
intended.
Updates tailscale/corp#12894
Updates tailscale/corp#29491
Signed-off-by: James Tucker <james@tailscale.com>
|
|
Add mesh key support to derpprobe for
probing derpers with verify set to true.
Move MeshKey checking to central point for code reuse.
Fix a bad error fmt msg.
Fixes tailscale/corp#27294
Fixes tailscale/corp#25756
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
|
|
To authenticate mesh keys, the DERP servers used a simple == comparison,
which is susceptible to a side channel timing attack.
By extracting the mesh key for a DERP server, an attacker could DoS it
by forcing disconnects using derp.Client.ClosePeer. They could also
enumerate the public Wireguard keys, IP addresses and ports for nodes
connected to that DERP server.
DERP servers configured without mesh keys deny all such requests.
This patch also extracts the mesh key logic into key.DERPMesh, to
prevent this from happening again.
Security bulletin: https://tailscale.com/security-bulletins#ts-2025-003
Fixes tailscale/corp#28720
Signed-off-by: Simon Law <sfllaw@tailscale.com>
|
|
This fixes the implementation and test from #15208 which apparently
never worked.
Ignore the metacert when counting the number of expected certs
presented.
And fix the test, pulling out the TLSConfig setup code into something
shared between the real cmd/derper and the test.
Fixes #15579
Change-Id: I90526e38e59f89b480629b415f00587b107de10a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Updates #12614
Change-Id: I0e2a18eca3515d3d6206c059110556d2bbbb0c5c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
The event bus's debug page uses websockets.
Updates #15160
Signed-off-by: David Anderson <dave@tailscale.com>
|
|
This adds netx.DialFunc, unifying a type we have a bazillion other
places, giving it now a nice short name that's clickable in
editors, etc.
That highlighted that my earlier move (03b47a55c7956) of stuff from
nettest into netx moved too much: it also dragged along the memnet
impl, meaning all users of netx.DialFunc who just wanted netx for the
type definition were instead also pulling in all of memnet.
So move the memnet implementation netx.Network into memnet, a package
we already had.
Then use netx.DialFunc in a bunch of places. I'm sure I missed some.
And plenty remain in other repos, to be updated later.
Updates tailscale/corp#27636
Change-Id: I7296cd4591218e8624e214f8c70dab05fb884e95
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
For people who can't use LetsEncrypt because it's banned.
Per https://github.com/tailscale/tailscale/issues/11776#issuecomment-2520955317
This does two things:
1) if you run derper with --certmode=manual and --hostname=$IP_ADDRESS
we previously permitted, but now we also:
* auto-generate the self-signed cert for you if it doesn't yet exist on disk
* print out the derpmap configuration you need to use that
self-signed cert
2) teaches derp/derphttp's derp dialer to verify the signature of
self-signed TLS certs, if so declared in the existing
DERPNode.CertName field, which previously existed for domain fronting,
separating out the dial hostname from how certs are validates,
so it's not overloaded much; that's what it was meant for.
Fixes #11776
Change-Id: Ie72d12f209416bb7e8325fe0838cd2c66342c5cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Fixes #10359
Change-Id: Ide49941c486d29856841016686827316878c9433
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
It was moved in f57fa3cbc30e.
Updates tailscale/corp#22748
Change-Id: I19f965e6bded1d4c919310aa5b864f2de0cd6220
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Updates tailscale/corp#26316
Signed-off-by: Jordan Whited <jordan@tailscale.com>
|
|
captive portal detection
Observed on some airlines (British Airways, WestJet), Squid is
configured to cache and transform these results, which is disruptive.
The server and client should both actively request that this is not done
by setting Cache-Control headers.
Send a timestamp parameter to further work against caches that do not
respect the cache-control headers.
Updates #14856
Signed-off-by: James Tucker <james@tailscale.com>
|
|
The timeout still defaults to 2 seconds, but can now be changed via command-line flag.
Updates tailscale/corp#26045
Signed-off-by: Percy Wegmann <percy@tailscale.com>
|
|
This interface is used both by the DERP client as well as the server.
Defining the interface in derp.go makes it clear that it is shared.
Updates tailscale/corp#26045
Signed-off-by: Percy Wegmann <percy@tailscale.com>
|
|
Remove "unexpected" labelling of PeerGoneReasonNotHere.
A peer being no longer connected to a DERP server
is not an unexpected case and causes confusion in looking at logs.
Fixes tailscale/corp#25609
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
|
|
Add bytes dropped counter metric by reason and kind.
Fixes tailscale/corp#25918
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
|
|
Metrics currently exist for dropped packets by reason, and total
received packets by kind (e.g., `disco` or `other`), but relating these
two together to gleam information about the drop rate for specific
reasons on a per-kind basis is not currently possible.
Change `derp_packets_dropped` to use a `metrics.MultiLabelMap` to
track both the `reason` and `kind` in the same metric to allow for this
desired level of granularity.
Drop metrics that this makes unnecessary (namely `packetsDroppedReason`
and `packetsDroppedType`).
Updates https://github.com/tailscale/corp/issues/25489
Signed-off-by: Mario Minardi <mario@tailscale.com>
|
|
Make dev-mode DERP probes work without TLS. Properly dial port `3340`
when not using HTTPS when dialing nodes in `derphttp_client`. Skip
verifying TLS state in `newConn` if we are not running a prober.
Updates tailscale/corp#24635
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Co-authored-by: Percy Wegmann <percy@tailscale.com>
|
|
Use envknob to configure the per client send
queue depth for the derp server.
Fixes tailscale/corp#24978
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
|
|
Or unless the new "ts_debug_websockets" build tag is set.
Updates #1278
Change-Id: Ic4c4f81c1924250efd025b055585faec37a5491d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
In f77821fd63 (released in v1.72.0), we made the client tell a DERP server
when the connection was not its ideal choice (the first node in its region).
But we didn't do anything with that information until now. This adds a
metric about how many such connections are on a given derper, and also
adds a bit to the PeerPresentFlags bitmask so watchers can identify
(and rebalance) them.
Updates tailscale/corp#372
Change-Id: Ief8af448750aa6d598e5939a57c062f4e55962be
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
|
Write timeouts can be indicative of stalled TCP streams. Understanding
changes in the rate of such events can be helpful in an ops context.
Updates tailscale/corp#23668
Signed-off-by: Jordan Whited <jordan@tailscale.com>
|
|
Updates tailscale/corp#24014
Change-Id: I700872be48ab337dce8e11cabef7f82b97f0422a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
|
