| Age | Commit message (Collapse) | Author | Files | Lines |
|
Add a new getsockopt_iter callback to struct proto_ops that uses
sockopt_t, a type-safe wrapper around iov_iter. This provides a clean
interface for socket option operations that works with both user and
kernel buffers.
The sockopt_t type encapsulates an iov_iter and an optlen field.
The optlen field, although not suggested by Linus, serves as both input
(buffer size) and output (returned data size), allowing callbacks to
return random values independent of the bytes written via
copy_to_iter(), so, keep it separated from iov_iter.count.
This is preparatory work for removing the SOL_SOCKET level restriction
from io_uring getsockopt operations.
Keep in mind that both iter_out and iter_in always point to the same
data at all times, and we just have two of them to make the callback
implementation sane.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260408-getsockopt-v3-1-061bb9cb355d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_core: Rate limit the logging of invalid ISO handle
- hci_sync: make hci_cmd_sync_run_once return -EEXIST if exists
- hci_event: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
- hci_event: fix potential UAF in SSP passkey handlers
- HCI: Avoid a couple -Wflex-array-member-not-at-end warnings
- L2CAP: CoC: Disconnect if received packet size exceeds MPS
- L2CAP: Add missing chan lock in l2cap_ecred_reconf_rsp
- L2CAP: Fix printing wrong information if SDU length exceeds MTU
- SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
drivers:
- btusb: MT7922: Add VID/PID 0489/e174
- btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
- btusb: Add MT7927 IDs ASUS ROG Crosshair X870E Hero, Lenovo Legion Pro 7
16ARX9, Gigabyte Z790 AORUS MASTER X, MSI X870E Ace Max, TP-Link
Archer TBE550E, ASUS X870E / ProArt X870E-Creator.
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: MediaTek MT7922: Add VID 0489 & PID e11d
- btintel: Add support for Scorpious Peak2 support
- btintel: Add support for Scorpious Peak2F support
- btintel_pcie: Add device id of Scorpius Peak2, Nova Lake-PCD-H
- btintel_pcie: Add device id of Scorpious2, Nova Lake-PCD-S
- btmtk: Add reset mechanism if downloading firmware failed
- btmtk: Add MT6639 (MT7927) Bluetooth support
- btmtk: fix ISO interface setup for single alt setting
- btmtk: add MT7902 SDIO support
- Bluetooth: btmtk: add MT7902 MCU support
- btbcm: Add entry for BCM4343A2 UART Bluetooth
- qca: enable pwrseq support for wcn39xx devices
- hci_qca: Fix BT not getting powered-off on rmmod
- hci_qca: disable power control for WCN7850 when bt_en is not defined
- hci_qca: Fix missing wakeup during SSR memdump handling
- hci_ldisc: Clear HCI_UART_PROTO_INIT on error
- mmc: sdio: add MediaTek MT7902 SDIO device ID
- hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
* tag 'for-net-next-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (59 commits)
Bluetooth: hci_qca: Fix missing wakeup during SSR memdump handling
Bluetooth: btintel_pcie: use strscpy to copy plain strings
Bluetooth: hci_event: fix potential UAF in SSP passkey handlers
Bluetooth: hci.h: Avoid a couple -Wflex-array-member-not-at-end warnings
Bluetooth: SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
Bluetooth: btintel_pcie: Align shared DMA memory to 128 bytes
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
Bluetooth: hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
Bluetooth: btusb: MediaTek MT7922: Add VID 0489 & PID e11d
Bluetooth: btmtk: hide unused btmtk_mt6639_devs[] array
Bluetooth: btusb: Add MT7927 ID for ASUS X870E / ProArt X870E-Creator
Bluetooth: btusb: Add MT7927 ID for TP-Link Archer TBE550E
Bluetooth: btusb: Add MT7927 ID for MSI X870E Ace Max
Bluetooth: btusb: Add MT7927 ID for Gigabyte Z790 AORUS MASTER X
Bluetooth: btusb: Add MT7927 ID for Lenovo Legion Pro 7 16ARX9
Bluetooth: btusb: Add MT7927 ID for ASUS ROG Crosshair X870E Hero
Bluetooth: btmtk: fix ISO interface setup for single alt setting
Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
Bluetooth: btmtk: refactor endpoint lookup
...
====================
Link: https://patch.msgid.link/20260413132247.320961-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit under Fixes moved recomputing the window clamp to
tcp_measure_rcv_mss() (when scaling_ratio changes).
I suspect it missed the fact that we don't recompute the clamp
when rcvbuf is set. Until scaling_ratio changes we are
stuck with the old window clamp which may be based on
the small initial buffer. scaling_ratio may never change.
Inspired by Eric's recent commit d1361840f8c5 ("tcp: fix
SO_RCVLOWAT and RCVBUF autotuning") plumb the user action
thru to TCP and have it update the clamp.
A smaller fix would be to just have tcp_rcvbuf_grow()
adjust the clamp even if SOCK_RCVBUF_LOCK is set.
But IIUC this is what we were trying to get away from
in the first place.
Fixes: a2cbb1603943 ("tcp: Update window clamping condition")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumaze@google.com>
Link: https://patch.msgid.link/20260408001438.129165-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Separate the rx and tx enablement/disablement into different
functions so that it is easier to interact with them independently
later.
Although this patch changes receive and transmit paths, the actual
behavior of the teaming driver should remain unchanged, since there
is no option introduced yet to change rx or tx enablement
independently. Those options will be added in follow-up patches.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-7-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add no functional changes, but rename enablement functions, variables
etc. that are used in teaming driver transmit decisions.
Since rx and tx enablement are still coupled, some of the variables
renamed in this patch are still used for the rx path, but that will
change in a follow-up patch.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-6-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This team mode op is only used by the load balance mode, and it only
uses it in the tx path.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-3-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This team_mode_op wasn't used by any of the team modes, so remove it.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-2-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The team_port's "index" and the team's "en_port_count" are read in
the hot transmit path, but are only written to when holding the rtnl
lock.
Use READ_ONCE() for all lockless reads of these values, and use
WRITE_ONCE() for all writes.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-1-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use container_of() macro instead of direct pointer casting to get the
pppox_sock from a sock pointer.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260410054954.114031-2-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sk member can be directly accessed from struct pppox_sock without
relying on type casting. Remove the sk_pppox() helper and update all
call sites to use po->sk directly.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260410054954.114031-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2026-04-09
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add icm_mng_function_id_mode cap bit
net/mlx5: Rename MLX5_PF page counter type to MLX5_SELF
net/mlx5: Add vhca_id_type bit to alias context
mlx5: Remove redundant iseg base
====================
Link: https://patch.msgid.link/20260409110431.154894-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
net: reduce sk_filter() (and friends) bloat
Some functions return an error by value, and a drop_reason
by an output parameter. This extra parameter can force stack canaries.
A drop_reason is enough and more efficient.
This series reduces bloat by 678 bytes on x86_64:
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.final
add/remove: 0/0 grow/shrink: 3/18 up/down: 79/-757 (-678)
Function old new delta
vsock_queue_rcv_skb 50 79 +29
ipmr_cache_report 1290 1315 +25
ip6mr_cache_report 1322 1347 +25
tcp_v6_rcv 3169 3167 -2
packet_rcv_spkt 329 327 -2
unix_dgram_sendmsg 1731 1726 -5
netlink_unicast 957 945 -12
netlink_dump 1372 1359 -13
sk_filter_trim_cap 889 858 -31
netlink_broadcast_filtered 1633 1595 -38
tcp_v4_rcv 3152 3111 -41
raw_rcv_skb 122 80 -42
ping_queue_rcv_skb 109 61 -48
ping_rcv 215 162 -53
rawv6_rcv_skb 278 224 -54
__sk_receive_skb 690 632 -58
raw_rcv 591 527 -64
udpv6_queue_rcv_one_skb 935 869 -66
udp_queue_rcv_one_skb 919 853 -66
tun_net_xmit 1146 1074 -72
sock_queue_rcv_skb_reason 166 76 -90
Total: Before=29722890, After=29722212, chg -0.00%
Future conversions from sock_queue_rcv_skb() to sock_queue_rcv_skb_reason()
can be done later.
====================
Link: https://patch.msgid.link/20260409145625.2306224-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current return value can be replaced with the drop_reason,
reducing kernel bloat:
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/11 up/down: 32/-603 (-571)
Function old new delta
tcp_v6_rcv 3135 3167 +32
unix_dgram_sendmsg 1731 1726 -5
netlink_unicast 957 945 -12
netlink_dump 1372 1359 -13
sk_filter_trim_cap 882 858 -24
tcp_v4_rcv 3143 3111 -32
__pfx_tcp_filter 32 - -32
netlink_broadcast_filtered 1633 1595 -38
sock_queue_rcv_skb_reason 126 76 -50
tun_net_xmit 1127 1074 -53
__sk_receive_skb 690 632 -58
udpv6_queue_rcv_one_skb 935 869 -66
udp_queue_rcv_one_skb 919 853 -66
tcp_filter 154 - -154
Total: Before=29722783, After=29722212, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409145625.2306224-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk_filter_trim_cap will soon return the reason by value,
do the same for sk_filter_reason().
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-21 (-21)
Function old new delta
sock_queue_rcv_skb_reason 128 126 -2
tun_net_xmit 1146 1127 -19
Total: Before=29722661, After=29722640, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409145625.2306224-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the .disable_autonomous_eee callback for the BCM54210E.
In AutogrEEEn mode the PHY manages EEE autonomously. Clearing the
AutogrEEEn enable bit in MII_BUF_CNTL_0 switches the PHY to Native
EEE mode.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260406-devel-autonomous-eee-v1-2-b335e7143711@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some PHYs (e.g. Broadcom BCM54xx, Realtek RTL8211F) implement
autonomous EEE where the PHY manages LPI signaling without forwarding
it to the MAC. This conflicts with MAC drivers that implement their own
LPI control.
Add a .disable_autonomous_eee callback to struct phy_driver and call it
from phy_support_eee(). When a MAC driver indicates it supports EEE via
phy_support_eee(), the PHY's autonomous EEE is automatically disabled so
the MAC can manage LPI entry/exit.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260406-devel-autonomous-eee-v1-1-b335e7143711@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add struct tso_dma_map to tso.h for tracking DMA addresses of mapped
GSO payload data and tso_dma_map_completion_state.
The tso_dma_map combines DMA mapping storage with iterator state, allowing
drivers to walk pre-mapped DMA regions linearly. Includes fields for
the DMA IOVA path (iova_state, iova_offset, total_len) and a fallback
per-region path (linear_dma, frags[], frag_idx, offset).
The tso_dma_map_completion_state makes the IOVA completion state opaque
for drivers. Drivers are expected to allocate this and use the added
helpers to update the completion state.
Adds skb_frag_phys() to skbuff.h, returning the physical address
of a paged fragment's data, which is used by the tso_dma_map helpers
introduced in this commit described below.
The added TSO DMA map helpers are:
tso_dma_map_init(): DMA-maps the linear payload region and all frags
upfront. Prefers the DMA IOVA API for a single contiguous mapping with
one IOTLB sync; falls back to per-region dma_map_phys() otherwise.
Returns 0 on success, cleans up partial mappings on failure.
tso_dma_map_cleanup(): Handles both IOVA and fallback teardown paths.
tso_dma_map_count(): counts how many descriptors the next N bytes of
payload will need. Returns 1 if IOVA is used since the mapping is
contiguous.
tso_dma_map_next(): yields the next (dma_addr, chunk_len) pair.
On the IOVA path, each segment is a single contiguous chunk. On the
fallback path, indicates when a chunk starts a new DMA mapping so the
driver can set dma_unmap_len on that descriptor for completion-time
unmapping.
tso_dma_map_completion_save(): updates the completion state. Drivers
will call this at xmit time.
tso_dma_map_complete(): tears down the mapping at completion time and
returns true if the IOVA path was used. If it was not used, this is a
no-op and returns false.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-2-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Final updates, notably:
- crypto: move Michael MIC code into wireless (only)
- mac80211:
- multi-link 4-addr support
- NAN data support (but no drivers yet)
- ath10k: DT quirk to make it work on some devices
- ath12k: IPQ5424 support
- rtw89: USB improvements for performance
* tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (124 commits)
wifi: cfg80211: Explicitly include <linux/export.h> in michael-mic.c
wifi: ath10k: Add device-tree quirk to skip host cap QMI requests
dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
crypto: Remove michael_mic from crypto_shash API
wifi: ipw2x00: Use michael_mic() from cfg80211
wifi: ath12k: Use michael_mic() from cfg80211
wifi: ath11k: Use michael_mic() from cfg80211
wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211
wifi: ipw2x00: Rename michael_mic() to libipw_michael_mic()
wifi: libertas_tf: refactor endpoint lookup
wifi: libertas: refactor endpoint lookup
wifi: at76c50x: refactor endpoint lookup
wifi: ath12k: Enable IPQ5424 WiFi device support
wifi: ath12k: Add CE remap hardware parameters for IPQ5424
wifi: ath12k: add ath12k_hw_regs for IPQ5424
wifi: ath12k: add ath12k_hw_version_map entry for IPQ5424
wifi: ath12k: Add ath12k_hw_params for IPQ5424
dt-bindings: net: wireless: add ath12k wifi device IPQ5424
wifi: ath10k: fix station lookup failure during disconnect
wifi: ath12k: Create symlink for each radio in a wiphy
...
====================
Link: https://patch.msgid.link/20260410064703.735099-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Daniel Borkmann says:
====================
netkit: Support for io_uring zero-copy and AF_XDP
Containers use virtual netdevs to route traffic from a physical netdev
in the host namespace. They do not have access to the physical netdev
in the host and thus can't use memory providers or AF_XDP that require
reconfiguring/restarting queues in the physical netdev.
This patchset adds the concept of queue leasing to virtual netdevs that
allow containers to use memory providers and AF_XDP at native speed.
Leased queues are bound to a real queue in a physical netdev and act
as a proxy.
Memory providers and AF_XDP operations take an ifindex and queue id,
so containers would pass in an ifindex for a virtual netdev and a queue
id of a leased queue, which then gets proxied to the underlying real
queue.
We have implemented support for this concept in netkit and tested the
latter against Nvidia ConnectX-6 (mlx5) as well as Broadcom BCM957504
(bnxt_en) 100G NICs. For more details see the individual patches.
====================
Link: https://patch.msgid.link/20260402231031.447597-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a netdevice notifier in netkit to watch for NETDEV_UNREGISTER events.
If the target device is indeed NETREG_UNREGISTERING and previously leased
a queue to a netkit device, then collect the related netkit devices and
batch-unregister_netdevice_many() them.
If this were not done, then the netkit device would hold a reference on
the physical device preventing it from going away. However, in case of
both io_uring zero-copy as well as AF_XDP this situation is handled
gracefully and the allocated resources are torn down.
In the case where mentioned infra is used through netkit, the applications
have a reference on netkit, and netkit in turn holds a reference on the
physical device. In order to have netkit release the reference on the
physical device, we need such watcher to then unregister the netkit ones.
This is generally quite similar to the dependency handling in case of
tunnels (e.g. vxlan bound to a underlying netdev) where the tunnel device
gets removed along with the physical device.
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
[...]
# rmmod mlx5_ib
# rmmod mlx5_core
[...]
[ 309.261822] mlx5_core 0000:0a:00.0 mlx5_0: Port: 1 Link DOWN
[ 344.235236] mlx5_core 0000:0a:00.1: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.246948] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.463754] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.770155] mlx5_core 0000:0a:00.1: E-Switch: cleanup
[...]
# ip a
[...]
[ both enp10s0f0np0 and nk gone ]
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-13-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement netdev_nl_queue_create_doit which creates a new rx queue in a
virtual netdev and then leases it to a rx queue in a physical netdev.
Example with ynl client:
# ynl --family netdev --output-json --do queue-create \
--json '{"ifindex": 8, "type": "rx", "lease": {"ifindex": 4, "queue": {"type": "rx", "id": 15}}}'
{'id': 1}
Note that the netdevice locking order is always from the virtual to
the physical device.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-3-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc8).
Conflicts:
net/ipv6/seg6_iptunnel.c
c3812651b522f ("seg6: separate dst_cache for input and output paths in seg6 lwtunnel")
78723a62b969a ("seg6: add per-route tunnel source address")
https://lore.kernel.org/adZhwtOYfo-0ImSa@sirena.org.uk
net/ipv4/icmp.c
fde29fd934932 ("ipv4: icmp: fix null-ptr-deref in icmp_build_probe()")
d98adfbdd5c01 ("ipv4: drop ipv6_stub usage and use direct function calls")
https://lore.kernel.org/adO3dccqnr6j-BL9@sirena.org.uk
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/chain_mode.c
51f4e090b9f8 ("net: stmmac: fix integer underflow in chain mode")
6b4286e05508 ("net: stmmac: rename STMMAC_GET_ENTRY() -> STMMAC_NEXT_ENTRY()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce the capability bit icm_mng_function_id_mode to indicate that
the device firmware uses vhca_id instead of function_id as the effective
identifier for the firmware commands MANAGE_PAGES, QUERY_PAGES, and page
request event.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090028.137783-3-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The MLX5_PF enum value in mlx5_func_type is used to track firmware
page allocations for the page manager function itself, which is either
the ECPF on SmartNIC systems or the host PF when there is no ECPF.
Rename it to MLX5_SELF to accurately reflect that this counter tracks
pages allocated by the manager for its own use, regardless of whether
it is a PF or ECPF.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090028.137783-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
There is no reason at all to export these data types to the global
include directory.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pretty self-explanatory, nobody needs these.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This has accumulated some fields which are no longer parsed by the core
or set by any driver. Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is not used anywhere in the kernel.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
김영민 reports that shstk_pop_sigframe() doesn't check for errors from
mmap_read_lock_killable(), which is a silly oversight, and also shows
that we haven't marked those functions with "__must_check", which would
have immediately caught it.
So let's fix both issues.
Reported-by: 김영민 <osori@hspace.io>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Export michael_mic() so that the ath11k and ath12k drivers can call it.
In addition, move it from mac80211 to cfg80211 so that the ipw2x00
drivers, which depend on cfg80211 but not mac80211, can also call it.
Currently these drivers have their own local implementations of
michael_mic() based on crypto_shash, which is redundant and inefficient.
By consolidating all the Michael MIC code into cfg80211, we'll be able
to remove the duplicate Michael MIC code in the crypto/ directory.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-3-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After commit 07919126ecfc ("netfilter: annotate NAT helper hook pointers
with __rcu"), sparse can warn about type/address-space mismatches when
RCU-dereferencing NAT helper hook function pointers.
The hooks are __rcu-annotated and accessed via rcu_dereference(), but the
combination of complex function pointer declarators and the WRITE_ONCE()
machinery used by RCU_INIT_POINTER()/rcu_assign_pointer() can confuse
sparse and trigger false positives.
Introduce typedefs for the NAT helper function types, so __rcu applies to
a simple "fn_t __rcu *" pointer form. Also replace local typeof(hook)
variables with "fn_t *" to avoid propagating __rcu address space into
temporaries.
No functional change intended.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603022359.3dGE9fwI-lkp@intel.com/
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
These will be needed to implement NAN synchronization in mac80211_hwsim.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.ebb52db4c1eb.Ie8142cf92fc8c97c744a7c8b0a94ce3da6ff75ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The largest part here are devicetree fixes for Qualcomm, and NXP i.MX,
addressing a few regressions and incorrect settings in board and SoC
pecific dts files.
The largest single commits are a revert of a cleanup patch for i.MX
that caused regressions for the NAND flash controller and a fixup for
an incomplete cleanup of the PCIe controller on Qualcomm platforms
that broke because the state was left incompatible with both the old
and new behavior.
On the Rockchips, Hisilicon, Renesas, Allwinner and AT91 platforms,
only a single simple dts bugfix each was added since the last round of
fixes.
On the SoC specific device drivers, everything is relatively harmless:
three reset controller driver fixes, a compatibility for fix ASpeed
soc ID, and error handling fixes for Qualcomm and Microchip. One
regression fix on Qualcomm addresses a problem with a previous fix for
DisplayPort alt mode"
* tag 'soc-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
arm64: dts: qcom: hamoa: Fix incomplete Root Port property migration
dt-bindings: display/msm: qcm2290-mdss: Fix missing ranges in example
firmware: microchip: fail auto-update probe if no flash found
arm64: dts: renesas: sparrow-hawk: Reserve first 128 MiB of DRAM
arm64: dts: qcom: agatti: Fix IOMMU DT properties
dt-bindings: media: venus: Fix iommus property
dt-bindings: display: msm: qcm2290-mdss: Fix iommus property
arm64: dts: allwinner: sun55i: Fix r-spi DMA
reset: spacemit: k3: Decouple composite reset lines
reset: gpio: fix double free in reset_add_gpio_aux_device() error path
ARM: dts: microchip: sam9x7: fix gpio-lines count for pioB
arm64: dts: hisilicon: hi3798cv200: Add missing dma-ranges
arm64: dts: hisilicon: poplar: Correct PCIe reset GPIO polarity
reset: rzg2l-usbphy-ctrl: Fix malformed MODULE_AUTHOR string
soc: microchip: mpfs-mss-top-sysreg: Fix resource leak on driver unbind
soc: microchip: mpfs-control-scb: Fix resource leak on driver unbind
soc: qcom: pmic_glink_altmode: Fix TBT->SAFE->!TBT transition
arm64: dts: qcom: monaco: Reserve full Gunyah metadata region
arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage up to 0.85V
Revert "arm64: dts: imx8mq-librem5: Set the DVS voltages lower"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are a relativly large number of small char/misc/iio and other
driver fixes for 7.0-rc7. There's a bunch, but overall they are all
small fixes for issues that people have been having that I finally
caught up with getting merged due to delays on my end.
The "largest" change overall is just some documentation updates to the
security-bugs.rst file to hopefully tell the AI tools (and any users
that actually read the documentation), how to send us better security
bug reports as the quantity of reports these past few weeks has
increased dramatically due to tools getting better at "finding"
things.
Included in here are:
- lots of small IIO driver fixes for issues reported in 7.0-rc
- gpib driver fixes
- comedi driver fixes
- interconnect driver fix
- nvmem driver fixes
- mei driver fix
- counter driver fix
- binder rust driver fixes
- some other small misc driver fixes
All of these have been in linux-next this week with no reported issues"
* tag 'char-misc-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (63 commits)
Documentation: fix two typos in latest update to the security report howto
Documentation: clarify the mandatory and desirable info for security reports
Documentation: explain how to find maintainers addresses for security reports
Documentation: minor updates to the security contacts
.get_maintainer.ignore: add myself
nvmem: zynqmp_nvmem: Fix buffer size in DMA and memcpy
nvmem: imx: assign nvmem_cell_info::raw_len
misc: fastrpc: check qcom_scm_assign_mem() return in rpmsg_probe
misc: fastrpc: possible double-free of cctx->remote_heap
comedi: dt2815: add hardware detection to prevent crash
comedi: runflags cannot determine whether to reclaim chanlist
comedi: Reinit dev->spinlock between attachments to low-level drivers
comedi: me_daq: Fix potential overrun of firmware buffer
comedi: me4000: Fix potential overrun of firmware buffer
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
gpib: fix use-after-free in IO ioctl handlers
gpib: lpvo_usb: fix memory leak on disconnect
gpib: Fix fluke driver s390 compile issue
lis3lv02d: Omit IRQF_ONESHOT if no threaded handler is provided
lis3lv02d: fix kernel-doc warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout
to Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding
and unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little
beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems"
* tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
usb: host: xhci-sideband: delegate offload_usage tracking to class drivers
usb: core: use dedicated spinlock for offload state
usb: cdns3: gadget: fix state inconsistency on gadget init failure
usb: dwc3: imx8mp: fix memory leak on probe failure path
usb: gadget: f_uac1_legacy: validate control request size
usb: ulpi: fix double free in ulpi_register_interface() error path
usb: misc: usbio: Fix URB memory leak on submit failure
USB: core: add NO_LPM quirk for Razer Kiyo Pro webcam
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
usb: core: phy: avoid double use of 'usb3-phy'
USB: serial: option: add MeiG Smart SRM825WN
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
usb: gadget: f_subset: Fix net_device lifecycle with device_move
usb: gadget: f_eem: Fix net_device lifecycle with device_move
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
usb: gadget: u_ncm: Add kernel-doc comments for struct f_ncm_opts
usb: gadget: f_rndis: Protect RNDIS options with mutex
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
dt-bindings: connector: add pd-disable dependency
...
|
|
Add new callback operations for a dpll device:
- freq_monitor_get(..) - to obtain current state of frequency monitor
feature from dpll device,
- freq_monitor_set(..) - to allow feature configuration.
Add new callback operation for a dpll pin:
- measured_freq_get(..) - to obtain the measured frequency in mHz.
Obtain the feature state value using the get callback and provide it to
the user if the device driver implements callbacks. The measured_freq_get
pin callback is only invoked when the frequency monitor is enabled.
The freq_monitor_get device callback is required when measured_freq_get
is provided by the driver.
Execute the set callback upon user requests.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260402184057.1890514-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some performance critical helpers from include/linux/skbuff.h
are not inlined by clang.
Use __always_inline hint for:
- __skb_fill_netmem_desc()
- __skb_fill_page_desc()
- skb_fill_netmem_desc()
- skb_fill_page_desc()
- __skb_pull()
- pskb_may_pull_reason()
- pskb_may_pull()
- pskb_pull()
- pskb_trim()
- skb_orphan()
- skb_postpull_rcsum()
- skb_header_pointer()
- skb_clear_delivery_time()
- skb_tstamp_cond()
- skb_warn_if_lro()
This increases performance and saves ~1200 bytes of text.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 4/24 grow/shrink: 66/12 up/down: 4104/-5306 (-1202)
Function old new delta
ip_multipath_l3_keys - 303 +303
tcp_sendmsg_locked 4560 4848 +288
xfrm_input 6240 6455 +215
esp_output_head 1516 1711 +195
skb_try_coalesce 696 866 +170
bpf_prog_test_run_skb 1951 2091 +140
tls_strp_read_copy 528 667 +139
gue_udp_recv 738 871 +133
__ip6_append_data 4159 4279 +120
__bond_xmit_hash 1019 1122 +103
ip6_multipath_l3_keys 394 495 +101
bpf_lwt_seg6_action 1096 1197 +101
input_action_end_dx2 344 442 +98
vxlan_remcsum 487 581 +94
udpv6_queue_rcv_skb 393 480 +87
udp_queue_rcv_skb 385 471 +86
gue_remcsum 453 539 +86
udp_lib_checksum_complete 84 168 +84
vxlan_xmit 2777 2857 +80
nf_reset_ct 456 532 +76
igmp_rcv 1902 1978 +76
mpls_forward 1097 1169 +72
tcp_add_backlog 1226 1292 +66
nfulnl_log_packet 3091 3156 +65
tcp_rcv_established 1966 2026 +60
__strp_recv 1547 1603 +56
eth_type_trans 357 411 +54
bond_flow_ip 392 444 +52
__icmp_send 1584 1630 +46
ip_defrag 1636 1681 +45
tpacket_rcv 2793 2837 +44
refcount_add 132 176 +44
nf_ct_frag6_gather 1959 2003 +44
napi_skb_free_stolen_head 199 240 +41
__pskb_trim - 41 +41
napi_reuse_skb 319 358 +39
icmpv6_rcv 1877 1916 +39
br_handle_frame_finish 1672 1711 +39
ip_rcv_core 841 879 +38
ip_check_defrag 377 415 +38
br_stp_rcv 909 947 +38
qdisc_pkt_len_segs_init 366 399 +33
mld_query_work 2945 2975 +30
bpf_sk_assign_tcp_reqsk 607 637 +30
udp_gro_receive 1657 1686 +29
ip6_rcv_core 1170 1193 +23
ah_input 1176 1197 +21
tun_get_user 5174 5194 +20
llc_rcv 815 834 +19
__pfx_udp_lib_checksum_complete 16 32 +16
__pfx_refcount_add 48 64 +16
__pfx_nf_reset_ct 96 112 +16
__pfx_ip_multipath_l3_keys - 16 +16
__pfx___pskb_trim - 16 +16
packet_sendmsg 5771 5781 +10
esp_output_tail 1460 1470 +10
alloc_skb_with_frags 433 443 +10
xsk_generic_xmit 3477 3486 +9
mptcp_sendmsg_frag 2250 2259 +9
__ip_append_data 4166 4175 +9
__ip6_tnl_rcv 1159 1168 +9
skb_zerocopy 1215 1220 +5
gre_parse_header 1358 1362 +4
__iptunnel_pull_header 405 407 +2
skb_vlan_untag 692 693 +1
psp_dev_rcv 701 702 +1
netkit_xmit 1263 1264 +1
gre_rcv 2776 2777 +1
gre_gso_segment 1521 1522 +1
bpf_skb_net_hdr_pop 535 536 +1
udp6_ufo_fragment 888 884 -4
br_multicast_rcv 9154 9148 -6
snap_rcv 312 305 -7
skb_copy_ubufs 1841 1834 -7
__pfx_skb_tstamp_cond 16 - -16
__pfx_skb_clear_delivery_time 16 - -16
__pfx_pskb_trim 16 - -16
__pfx_pskb_pull 16 - -16
ipv6_gso_segment 1400 1383 -17
ipv6_frag_rcv 2511 2492 -19
erspan_xmit 1221 1190 -31
__pfx_skb_warn_if_lro 32 - -32
__pfx___skb_fill_page_desc 32 - -32
skb_tstamp_cond 42 - -42
pskb_trim 46 - -46
__pfx_skb_postpull_rcsum 48 - -48
tcp_gso_segment 1524 1475 -49
skb_clear_delivery_time 54 - -54
__pfx_skb_fill_page_desc 64 - -64
__pfx_skb_header_pointer 80 - -80
pskb_pull 91 - -91
skb_warn_if_lro 110 - -110
tcp_v6_rcv 3288 3170 -118
__pfx___skb_pull 128 - -128
__pfx_skb_orphan 144 - -144
__pfx_pskb_may_pull 160 - -160
tcp_v4_rcv 3334 3153 -181
__skb_fill_page_desc 231 - -231
udp_rcv 1809 1553 -256
skb_postpull_rcsum 318 - -318
skb_header_pointer 367 - -367
fib_multipath_hash 3399 3018 -381
skb_orphan 513 - -513
skb_fill_page_desc 534 - -534
__skb_pull 568 - -568
pskb_may_pull 604 - -604
Total: Before=29652698, After=29651496, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260402152654.1720627-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix kerneldocs for gpio-timberdale and gpio-nomadik
- clear the "requested" flag in error path in gpiod_request_commit()
- call of_xlate() if provided when setting up shared GPIOs
- handle pins shared by child firmware nodes of consumer devices
- fix return value check in gpio-qixis-fpga
- fix suspend on gpio-mxc
- fix gpio-microchip DT bindings
* tag 'gpio-fixes-for-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
dt-bindings: gpio: fix microchip #interrupt-cells
gpio: shared: shorten the critical section in gpiochip_setup_shared()
gpio: mxc: map Both Edge pad wakeup to Rising Edge
gpio: qixis-fpga: Fix error handling for devm_regmap_init_mmio()
gpio: shared: handle pins shared by child nodes of devices
gpio: shared: call gpio_chip::of_xlate() if set
gpiolib: clear requested flag if line is invalid
gpio: nomadik: repair some kernel-doc comments
gpio: timberdale: repair kernel-doc comments
gpio: Fix resource leaks on errors in gpiochip_add_data_with_key()
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix register equivalence for pointers to packet (Alexei Starovoitov)
- Fix incorrect pruning due to atomic fetch precision tracking (Daniel
Borkmann)
- Fix grace period wait for bpf_link-ed tracepoints (Kumar Kartikeya
Dwivedi)
- Fix use-after-free of sockmap's sk->sk_socket (Kuniyuki Iwashima)
- Reject direct access to nullable PTR_TO_BUF pointers (Qi Tang)
- Reject sleepable kprobe_multi programs at attach time (Varun R
Mallya)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add more precision tracking tests for atomics
bpf: Fix incorrect pruning due to atomic fetch precision tracking
bpf: Reject sleepable kprobe_multi programs at attach time
bpf: reject direct access to nullable PTR_TO_BUF pointers
bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready().
bpf: Fix grace period wait for tracepoint bpf_link
bpf: Fix regsafe() for pointers to packet
|
|
Implement the standard ETHTOOL_PHY_DOWNSHIFT tunable for the LAN88xx
PHY. This allows runtime configuration of the auto-downshift feature
via ethtool:
ethtool --set-phy-tunable eth0 downshift on count 3
The LAN88xx PHY supports downshifting from 1000BASE-T to 100BASE-TX
after 2-5 failed auto-negotiation attempts. Valid count values are
2, 3, 4 and 5.
This is based on an earlier downstream implementation by Phil Elwell.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260401123848.696766-2-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc7).
Conflicts:
net/vmw_vsock/af_vsock.c
b18c83388874 ("vsock: initialize child_ns_mode_locked in vsock_net_init()")
0de607dc4fd8 ("vsock: add G2H fallback for CIDs not owned by H2G transport")
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
ceee35e5674a ("bnxt_en: Refactor some basic ring setup and adjustment logic")
57cdfe0dc70b ("bnxt_en: Resize RSS contexts on channel count change")
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c
4d56037a02bd ("wifi: iwlwifi: mld: block EMLSR during TDLS connections")
687a95d204e7 ("wifi: iwlwifi: mld: correctly set wifi generation data")
drivers/net/wireless/intel/iwlwifi/mld/scan.h
b6045c899e37 ("wifi: iwlwifi: mld: Refactor scan command handling")
ec66ec6a5a8f ("wifi: iwlwifi: mld: Fix MLO scan timing")
drivers/net/wireless/intel/iwlwifi/mvm/fw.c
078df640ef05 ("wifi: iwlwifi: mld: add support for iwl_mcc_allowed_ap_type_cmd v
2")
323156c3541e ("wifi: iwlwifi: mvm: don't send a 6E related command when not supported")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"With fixes from wireless, bluetooth and netfilter included we're back
to each PR carrying 30%+ more fixes than in previous era.
The good news is that so far none of the "extra" fixes are themselves
causing real regressions. Not sure how much comfort that is.
Current release - fix to a fix:
- netdevsim: fix build if SKB_EXTENSIONS=n
- eth: stmmac: skip VLAN restore when VLAN hash ops are missing
Previous releases - regressions:
- wifi: iwlwifi: mvm: don't send a 6E related command when
not supported
Previous releases - always broken:
- some info leak fixes
- add missing clearing of skb->cb[] on ICMP paths from tunnels
- ipv6:
- flowlabel: defer exclusive option free until RCU teardown
- avoid overflows in ip6_datagram_send_ctl()
- mpls: add seqcount to protect platform_labels from OOB access
- bridge: improve safety of parsing ND options
- bluetooth: fix leaks, overflows and races in hci_sync
- netfilter: add more input validation, some to address bugs directly
some to prevent exploits from cooking up broken configurations
- wifi:
- ath: avoid poor performance due to stopping the wrong
aggregation session
- virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free
- eth:
- fec: fix the PTP periodic output sysfs interface
- enetc: safely reinitialize TX BD ring when it has unsent frames"
* tag 'net-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
eth: fbnic: Increase FBNIC_QUEUE_SIZE_MIN to 64
ipv6: avoid overflows in ip6_datagram_send_ctl()
net: hsr: fix VLAN add unwind on slave errors
net: hsr: serialize seq_blocks merge across nodes
vsock: initialize child_ns_mode_locked in vsock_net_init()
selftests/tc-testing: add tests for cls_fw and cls_flow on shared blocks
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
net/x25: Fix overflow when accumulating packets
net/x25: Fix potential double free of skb
bnxt_en: Restore default stat ctxs for ULP when resource is available
bnxt_en: Don't assume XDP is never enabled in bnxt_init_dflt_ring_mode()
bnxt_en: Refactor some basic ring setup and adjustment logic
net/mlx5: Fix switchdev mode rollback in case of failure
net/mlx5: Avoid "No data available" when FW version queries fail
net/mlx5: lag: Check for LAG device before creating debugfs
net: macb: properly unregister fixed rate clocks
net: macb: fix clk handling on PCI glue driver removal
virtio_net: clamp rss_max_key_size to NETDEV_RSS_KEY_LEN
net/sched: sch_netem: fix out-of-bounds access in packet corruption
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- IOMMU-PT related compile breakage in for AMD driver
- IOTLB flushing behavior when unmapped region is larger than requested
due to page-sizes
- Fix IOTLB flush behavior with empty gathers
* tag 'iommu-fixes-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommupt/amdv1: mark amdv1pt_install_leaf_entry as __always_inline
iommupt: Fix short gather if the unmap goes into a large mapping
iommu: Do not call drivers for empty gathers
|
|
Replace the coarse USB device lock with a dedicated offload_lock
spinlock to reduce contention during offload operations. Use
offload_pm_locked to synchronize with PM transitions and replace
the legacy offload_at_suspend flag.
Optimize usb_offload_get/put by switching from auto-resume/suspend
to pm_runtime_get_if_active(). This ensures offload state is only
modified when the device is already active, avoiding unnecessary
power transitions.
Cc: stable <stable@kernel.org>
Fixes: ef82a4803aab ("xhci: sideband: add api to trace sideband usage")
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Tested-by: Hailong Liu <hailong.liu@oppo.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260401123238.3790062-2-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v7.0
Fix the length of the PD restart reason string in pd-mapper to avoid
QMI decoding errors, resulting in the notification being dropped.
Fix the newly introduce handling of TBT/USB4 notifications in pmic_glink
altmode driver, as it broke the handling of non-TBT/USB4 DisplayPort
unplug events.
* tag 'qcom-drivers-fixes-for-7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink_altmode: Fix TBT->SAFE->!TBT transition
soc: qcom: pmic_glink_altmode: Fix SVID=DP && unconnected edge case
soc: qcom: pd-mapper: Fix element length in servreg_loc_pfr_req_ei
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
IPSET_ATTR_NAME and IPSET_ATTR_NAMEREF are of NLA_STRING type, they
cannot be treated like a c-string.
They either have to be switched to NLA_NUL_STRING, or the compare
operations need to use the nla functions.
Fixes: f830837f0eed ("netfilter: ipset: list:set set type support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use the correct kernel-doc format to avoid kernel-doc warnings:
Warning: include/linux/lis3lv02d.h:125 struct member 'st_min_limits' not
described in 'lis3lv02d_platform_data'
Warning: include/linux/lis3lv02d.h:125 struct member 'st_max_limits' not
described in 'lis3lv02d_platform_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260312051400.682991-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Recently, tracepoints were switched from using disabled preemption
(which acts as RCU read section) to SRCU-fast when they are not
faultable. This means that to do a proper grace period wait for programs
running in such tracepoints, we must use SRCU's grace period wait.
This is only for non-faultable tracepoints, faultable ones continue
using RCU Tasks Trace.
However, bpf_link_free() currently does call_rcu() for all cases when
the link is non-sleepable (hence, for tracepoints, non-faultable). Fix
this by doing a call_srcu() grace period wait.
As far RCU Tasks Trace gp -> RCU gp chaining is concerned, it is deemed
unnecessary for tracepoint programs. The link and program are either
accessed under RCU Tasks Trace protection, or SRCU-fast protection now.
The earlier logic of chaining both RCU Tasks Trace and RCU gp waits was
to generalize the logic, even if it conceded an extra RCU gp wait,
however that is unnecessary for tracepoints even before this change.
In practice no cost was paid since rcu_trace_implies_rcu_gp() was always
true. Hence we need not chaining any RCU gp after the SRCU gp.
For instance, in the non-faultable raw tracepoint, the RCU read section
of the program in __bpf_trace_run() is enclosed in the SRCU gp, likewise
for faultable raw tracepoint, the program is under the RCU Tasks Trace
protection. Hence, the outermost scope can be waited upon to ensure
correctness.
Also, sleepable programs cannot be attached to non-faultable
tracepoints, so whenever program or link is sleepable, only RCU Tasks
Trace protection is being used for the link and prog.
Fixes: a46023d5616e ("tracing: Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast")
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20260331211021.1632902-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix cgroup rmdir racing with dying tasks.
Deferred task cgroup unlink introduced a window where cgroup.procs
is empty but the cgroup is still populated, causing rmdir to fail
with -EBUSY and selftest failures.
Make rmdir wait for dying tasks to fully leave and fix selftests to
not depend on synchronous populated updates.
- Fix cpuset v1 task migration failure from empty cpusets under strict
security policies.
When CPU hotplug removes the last CPU from a v1 cpuset, tasks must be
migrated to an ancestor without a security_task_setscheduler() check
that would block the migration.
* tag 'cgroup-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Skip security check for hotplug induced v1 task migration
cgroup/cpuset: Simplify setsched decision check in task iteration loop of cpuset_can_attach()
cgroup: Fix cgroup_drain_dying() testing the wrong condition
selftests/cgroup: Don't require synchronous populated update on task exit
cgroup: Wait for dying tasks to leave on rmdir
|