From 55fb52ffdd62850d667ebed842815e072d3c9961 Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Sun, 2 Nov 2025 20:16:12 +0200 Subject: Bluetooth: MGMT: cancel mesh send timer when hdev removed mesh_send_done timer is not canceled when hdev is removed, which causes crash if the timer triggers after hdev is gone. Cancel the timer when MGMT removes the hdev, like other MGMT timers. Should fix the BUG: sporadically seen by BlueZ test bot (in "Mesh - Send cancel - 1" test). Log: ------ BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0 ... Freed by task 36: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x43/0x70 kfree+0x103/0x500 device_release+0x9a/0x210 kobject_put+0x100/0x1e0 vhci_release+0x18b/0x240 ------ Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Link: https://lore.kernel.org/linux-bluetooth/67364c09.0c0a0220.113cba.39ff@mx.google.com/ Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/mgmt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 79762bfaea5f..262bf984d2aa 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -9497,6 +9497,7 @@ void mgmt_index_removed(struct hci_dev *hdev) cancel_delayed_work_sync(&hdev->discov_off); cancel_delayed_work_sync(&hdev->service_cache); cancel_delayed_work_sync(&hdev->rpa_expired); + cancel_delayed_work_sync(&hdev->mesh_send_done); } void mgmt_power_on(struct hci_dev *hdev, int err) -- cgit v1.3-3-g829e From 23d22f2f71768034d6ef86168213843fc49bf550 Mon Sep 17 00:00:00 2001 From: Raphael Pinsonneault-Thibeault Date: Wed, 5 Nov 2025 14:28:41 -0500 Subject: Bluetooth: btusb: reorder cleanup in btusb_disconnect to avoid UAF There is a KASAN: slab-use-after-free read in btusb_disconnect(). Calling "usb_driver_release_interface(&btusb_driver, data->intf)" will free the btusb data associated with the interface. The same data is then used later in the function, hence the UAF. Fix by moving the accesses to btusb data to before the data is free'd. Reported-by: syzbot+2fc81b50a4f8263a159b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2fc81b50a4f8263a159b Tested-by: syzbot+2fc81b50a4f8263a159b@syzkaller.appspotmail.com Fixes: fd913ef7ce619 ("Bluetooth: btusb: Add out-of-band wakeup support") Signed-off-by: Raphael Pinsonneault-Thibeault Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btusb.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 5e9ebf0c5312..a722446ec73d 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -4361,6 +4361,11 @@ static void btusb_disconnect(struct usb_interface *intf) hci_unregister_dev(hdev); + if (data->oob_wake_irq) + device_init_wakeup(&data->udev->dev, false); + if (data->reset_gpio) + gpiod_put(data->reset_gpio); + if (intf == data->intf) { if (data->isoc) usb_driver_release_interface(&btusb_driver, data->isoc); @@ -4371,17 +4376,11 @@ static void btusb_disconnect(struct usb_interface *intf) usb_driver_release_interface(&btusb_driver, data->diag); usb_driver_release_interface(&btusb_driver, data->intf); } else if (intf == data->diag) { - usb_driver_release_interface(&btusb_driver, data->intf); if (data->isoc) usb_driver_release_interface(&btusb_driver, data->isoc); + usb_driver_release_interface(&btusb_driver, data->intf); } - if (data->oob_wake_irq) - device_init_wakeup(&data->udev->dev, false); - - if (data->reset_gpio) - gpiod_put(data->reset_gpio); - hci_free_dev(hdev); } -- cgit v1.3-3-g829e From 3b78f50918276ab28fb22eac9aa49401ac436a3b Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Mon, 3 Nov 2025 20:29:46 +0200 Subject: Bluetooth: 6lowpan: reset link-local header on ipv6 recv path Bluetooth 6lowpan.c netdev has header_ops, so it must set link-local header for RX skb, otherwise things crash, eg. with AF_PACKET SOCK_RAW Add missing skb_reset_mac_header() for uncompressed ipv6 RX path. For the compressed one, it is done in lowpan_header_decompress(). Log: (BlueZ 6lowpan-tester Client Recv Raw - Success) ------ kernel BUG at net/core/skbuff.c:212! Call Trace: ... packet_rcv (net/packet/af_packet.c:2152) ... __local_bh_enable_ip (kernel/softirq.c:407) netif_rx (net/core/dev.c:5648) chan_recv_cb (net/bluetooth/6lowpan.c:294 net/bluetooth/6lowpan.c:359) ------ Fixes: 18722c247023 ("Bluetooth: Enable 6LoWPAN support for BT LE devices") Reviewed-by: Paul Menzel Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/6lowpan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c index f0c862091bff..f1d29fa4b411 100644 --- a/net/bluetooth/6lowpan.c +++ b/net/bluetooth/6lowpan.c @@ -289,6 +289,7 @@ static int recv_pkt(struct sk_buff *skb, struct net_device *dev, local_skb->pkt_type = PACKET_HOST; local_skb->dev = dev; + skb_reset_mac_header(local_skb); skb_set_transport_header(local_skb, sizeof(struct ipv6hdr)); if (give_skb_to_upper(local_skb, dev) != NET_RX_SUCCESS) { -- cgit v1.3-3-g829e From b454505bf57a2e4f5d49951d4deb03730a9348d9 Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Mon, 3 Nov 2025 20:29:47 +0200 Subject: Bluetooth: 6lowpan: fix BDADDR_LE vs ADDR_LE_DEV address type confusion Bluetooth 6lowpan.c confuses BDADDR_LE and ADDR_LE_DEV address types, e.g. debugfs "connect" command takes the former, and "disconnect" and "connect" to already connected device take the latter. This is due to using same value both for l2cap_chan_connect and hci_conn_hash_lookup_le which take different dst_type values. Fix address type passed to hci_conn_hash_lookup_le(). Retain the debugfs API difference between "connect" and "disconnect" commands since it's been like this since 2015 and nobody apparently complained. Fixes: f5ad4ffceba0 ("Bluetooth: 6lowpan: Use hci_conn_hash_lookup_le() when possible") Reviewed-by: Paul Menzel Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/6lowpan.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c index f1d29fa4b411..0d8c2e2e9a6c 100644 --- a/net/bluetooth/6lowpan.c +++ b/net/bluetooth/6lowpan.c @@ -957,10 +957,11 @@ static struct l2cap_chan *bt_6lowpan_listen(void) } static int get_l2cap_conn(char *buf, bdaddr_t *addr, u8 *addr_type, - struct l2cap_conn **conn) + struct l2cap_conn **conn, bool disconnect) { struct hci_conn *hcon; struct hci_dev *hdev; + int le_addr_type; int n; n = sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx %hhu", @@ -971,13 +972,32 @@ static int get_l2cap_conn(char *buf, bdaddr_t *addr, u8 *addr_type, if (n < 7) return -EINVAL; + if (disconnect) { + /* The "disconnect" debugfs command has used different address + * type constants than "connect" since 2015. Let's retain that + * for now even though it's obviously buggy... + */ + *addr_type += 1; + } + + switch (*addr_type) { + case BDADDR_LE_PUBLIC: + le_addr_type = ADDR_LE_DEV_PUBLIC; + break; + case BDADDR_LE_RANDOM: + le_addr_type = ADDR_LE_DEV_RANDOM; + break; + default: + return -EINVAL; + } + /* The LE_PUBLIC address type is ignored because of BDADDR_ANY */ hdev = hci_get_route(addr, BDADDR_ANY, BDADDR_LE_PUBLIC); if (!hdev) return -ENOENT; hci_dev_lock(hdev); - hcon = hci_conn_hash_lookup_le(hdev, addr, *addr_type); + hcon = hci_conn_hash_lookup_le(hdev, addr, le_addr_type); hci_dev_unlock(hdev); hci_dev_put(hdev); @@ -1104,7 +1124,7 @@ static ssize_t lowpan_control_write(struct file *fp, buf[buf_size] = '\0'; if (memcmp(buf, "connect ", 8) == 0) { - ret = get_l2cap_conn(&buf[8], &addr, &addr_type, &conn); + ret = get_l2cap_conn(&buf[8], &addr, &addr_type, &conn, false); if (ret == -EINVAL) return ret; @@ -1141,7 +1161,7 @@ static ssize_t lowpan_control_write(struct file *fp, } if (memcmp(buf, "disconnect ", 11) == 0) { - ret = get_l2cap_conn(&buf[11], &addr, &addr_type, &conn); + ret = get_l2cap_conn(&buf[11], &addr, &addr_type, &conn, true); if (ret < 0) return ret; -- cgit v1.3-3-g829e From e060088db0bdf7932e0e3c2d24b7371c4c5b867c Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Mon, 3 Nov 2025 20:29:48 +0200 Subject: Bluetooth: L2CAP: export l2cap_chan_hold for modules l2cap_chan_put() is exported, so export also l2cap_chan_hold() for modules. l2cap_chan_hold() has use case in net/bluetooth/6lowpan.c Signed-off-by: Pauli Virtanen Reviewed-by: Paul Menzel Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/l2cap_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index d08320380ad6..35c57657bcf4 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -497,6 +497,7 @@ void l2cap_chan_hold(struct l2cap_chan *c) kref_get(&c->kref); } +EXPORT_SYMBOL_GPL(l2cap_chan_hold); struct l2cap_chan *l2cap_chan_hold_unless_zero(struct l2cap_chan *c) { -- cgit v1.3-3-g829e From 98454bc812f3611551e4b1f81732da4aa7b9597e Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Mon, 3 Nov 2025 20:29:49 +0200 Subject: Bluetooth: 6lowpan: Don't hold spin lock over sleeping functions disconnect_all_peers() calls sleeping function (l2cap_chan_close) under spinlock. Holding the lock doesn't actually do any good -- we work on a local copy of the list, and the lock doesn't protect against peer->chan having already been freed. Fix by taking refcounts of peer->chan instead. Clean up the code and old comments a bit. Take devices_lock instead of RCU, because the kfree_rcu(); l2cap_chan_put(); construct in chan_close_cb() does not guarantee peer->chan is necessarily valid in RCU. Also take l2cap_chan_lock() which is required for l2cap_chan_close(). Log: (bluez 6lowpan-tester Client Connect - Disable) ------ BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575 ... ... l2cap_send_disconn_req (net/bluetooth/l2cap_core.c:938 net/bluetooth/l2cap_core.c:1495) ... ? __pfx_l2cap_chan_close (net/bluetooth/l2cap_core.c:809) do_enable_set (net/bluetooth/6lowpan.c:1048 net/bluetooth/6lowpan.c:1068) ------ Fixes: 90305829635d ("Bluetooth: 6lowpan: Converting rwlocks to use RCU") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/6lowpan.c | 68 +++++++++++++++++++++++++++++++------------------ 1 file changed, 43 insertions(+), 25 deletions(-) diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c index 0d8c2e2e9a6c..588d7e94e606 100644 --- a/net/bluetooth/6lowpan.c +++ b/net/bluetooth/6lowpan.c @@ -53,6 +53,11 @@ static bool enable_6lowpan; static struct l2cap_chan *listen_chan; static DEFINE_MUTEX(set_lock); +enum { + LOWPAN_PEER_CLOSING, + LOWPAN_PEER_MAXBITS +}; + struct lowpan_peer { struct list_head list; struct rcu_head rcu; @@ -61,6 +66,8 @@ struct lowpan_peer { /* peer addresses in various formats */ unsigned char lladdr[ETH_ALEN]; struct in6_addr peer_addr; + + DECLARE_BITMAP(flags, LOWPAN_PEER_MAXBITS); }; struct lowpan_btle_dev { @@ -1014,41 +1021,52 @@ static int get_l2cap_conn(char *buf, bdaddr_t *addr, u8 *addr_type, static void disconnect_all_peers(void) { struct lowpan_btle_dev *entry; - struct lowpan_peer *peer, *tmp_peer, *new_peer; - struct list_head peers; - - INIT_LIST_HEAD(&peers); + struct lowpan_peer *peer; + int nchans; - /* We make a separate list of peers as the close_cb() will - * modify the device peers list so it is better not to mess - * with the same list at the same time. + /* l2cap_chan_close() cannot be called from RCU, and lock ordering + * chan->lock > devices_lock prevents taking write side lock, so copy + * then close. */ rcu_read_lock(); + list_for_each_entry_rcu(entry, &bt_6lowpan_devices, list) + list_for_each_entry_rcu(peer, &entry->peers, list) + clear_bit(LOWPAN_PEER_CLOSING, peer->flags); + rcu_read_unlock(); - list_for_each_entry_rcu(entry, &bt_6lowpan_devices, list) { - list_for_each_entry_rcu(peer, &entry->peers, list) { - new_peer = kmalloc(sizeof(*new_peer), GFP_ATOMIC); - if (!new_peer) - break; + do { + struct l2cap_chan *chans[32]; + int i; - new_peer->chan = peer->chan; - INIT_LIST_HEAD(&new_peer->list); + nchans = 0; - list_add(&new_peer->list, &peers); - } - } + spin_lock(&devices_lock); - rcu_read_unlock(); + list_for_each_entry_rcu(entry, &bt_6lowpan_devices, list) { + list_for_each_entry_rcu(peer, &entry->peers, list) { + if (test_and_set_bit(LOWPAN_PEER_CLOSING, + peer->flags)) + continue; - spin_lock(&devices_lock); - list_for_each_entry_safe(peer, tmp_peer, &peers, list) { - l2cap_chan_close(peer->chan, ENOENT); + l2cap_chan_hold(peer->chan); + chans[nchans++] = peer->chan; - list_del_rcu(&peer->list); - kfree_rcu(peer, rcu); - } - spin_unlock(&devices_lock); + if (nchans >= ARRAY_SIZE(chans)) + goto done; + } + } + +done: + spin_unlock(&devices_lock); + + for (i = 0; i < nchans; ++i) { + l2cap_chan_lock(chans[i]); + l2cap_chan_close(chans[i], ENOENT); + l2cap_chan_unlock(chans[i]); + l2cap_chan_put(chans[i]); + } + } while (nchans); } struct set_enable { -- cgit v1.3-3-g829e From 15f32cabf426143ec1d2c8faf2bbca40c0fbd61b Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Mon, 3 Nov 2025 20:29:50 +0200 Subject: Bluetooth: 6lowpan: add missing l2cap_chan_lock() l2cap_chan_close() needs to be called in l2cap_chan_lock(), otherwise l2cap_le_sig_cmd() etc. may run concurrently. Add missing locks around l2cap_chan_close(). Fixes: 6b8d4a6a0314 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/6lowpan.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c index 588d7e94e606..2c21ae8abadc 100644 --- a/net/bluetooth/6lowpan.c +++ b/net/bluetooth/6lowpan.c @@ -927,7 +927,9 @@ static int bt_6lowpan_disconnect(struct l2cap_conn *conn, u8 dst_type) BT_DBG("peer %p chan %p", peer, peer->chan); + l2cap_chan_lock(peer->chan); l2cap_chan_close(peer->chan, ENOENT); + l2cap_chan_unlock(peer->chan); return 0; } @@ -1089,7 +1091,9 @@ static void do_enable_set(struct work_struct *work) mutex_lock(&set_lock); if (listen_chan) { + l2cap_chan_lock(listen_chan); l2cap_chan_close(listen_chan, 0); + l2cap_chan_unlock(listen_chan); l2cap_chan_put(listen_chan); } @@ -1148,7 +1152,9 @@ static ssize_t lowpan_control_write(struct file *fp, mutex_lock(&set_lock); if (listen_chan) { + l2cap_chan_lock(listen_chan); l2cap_chan_close(listen_chan, 0); + l2cap_chan_unlock(listen_chan); l2cap_chan_put(listen_chan); listen_chan = NULL; } @@ -1310,7 +1316,9 @@ static void __exit bt_6lowpan_exit(void) debugfs_remove(lowpan_control_debugfs); if (listen_chan) { + l2cap_chan_lock(listen_chan); l2cap_chan_close(listen_chan, 0); + l2cap_chan_unlock(listen_chan); l2cap_chan_put(listen_chan); } -- cgit v1.3-3-g829e From 41bf23338a501e745c398e0faee948dd05d0be98 Mon Sep 17 00:00:00 2001 From: Luiz Augusto von Dentz Date: Tue, 4 Nov 2025 17:02:04 -0500 Subject: Bluetooth: hci_conn: Fix not cleaning up PA_LINK connections Contrary to what was stated on d36349ea73d8 ("Bluetooth: hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK") the PA_LINK does in fact needs to run bis_cleanup in order to terminate the PA Sync, since that is bond to the listening socket which is the entity that controls the lifetime of PA Sync, so if it is closed/released the PA Sync shall be terminated, terminating the PA Sync shall not result in the BIG Sync being terminated since once the later is established it doesn't depend on the former anymore. If the use user wants to reconnect/rebind a number of BIS(s) it shall keep the socket open until it no longer needs the PA Sync, which means it retains full control of the lifetime of both PA and BIG Syncs. Fixes: d36349ea73d8 ("Bluetooth: hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK") Fixes: a7bcffc673de ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections") Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hci_conn.c | 33 +++++++++++++++++++-------------- net/bluetooth/hci_event.c | 7 +------ net/bluetooth/hci_sync.c | 2 +- 3 files changed, 21 insertions(+), 21 deletions(-) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index c5dedf39a129..6fc0692abf05 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -769,21 +769,23 @@ static void find_bis(struct hci_conn *conn, void *data) d->count++; } -static int hci_le_big_terminate(struct hci_dev *hdev, u8 big, struct hci_conn *conn) +static int hci_le_big_terminate(struct hci_dev *hdev, struct hci_conn *conn) { struct iso_list_data *d; int ret; - bt_dev_dbg(hdev, "big 0x%2.2x sync_handle 0x%4.4x", big, conn->sync_handle); + bt_dev_dbg(hdev, "hcon %p big 0x%2.2x sync_handle 0x%4.4x", conn, + conn->iso_qos.bcast.big, conn->sync_handle); d = kzalloc(sizeof(*d), GFP_KERNEL); if (!d) return -ENOMEM; - d->big = big; + d->big = conn->iso_qos.bcast.big; d->sync_handle = conn->sync_handle; - if (test_and_clear_bit(HCI_CONN_PA_SYNC, &conn->flags)) { + if (conn->type == PA_LINK && + test_and_clear_bit(HCI_CONN_PA_SYNC, &conn->flags)) { hci_conn_hash_list_flag(hdev, find_bis, PA_LINK, HCI_CONN_PA_SYNC, d); @@ -801,6 +803,9 @@ static int hci_le_big_terminate(struct hci_dev *hdev, u8 big, struct hci_conn *c d->big_sync_term = true; } + if (!d->pa_sync_term && !d->big_sync_term) + return 0; + ret = hci_cmd_sync_queue(hdev, big_terminate_sync, d, terminate_big_destroy); if (ret) @@ -852,8 +857,7 @@ static void bis_cleanup(struct hci_conn *conn) hci_le_terminate_big(hdev, conn); } else { - hci_le_big_terminate(hdev, conn->iso_qos.bcast.big, - conn); + hci_le_big_terminate(hdev, conn); } } @@ -994,19 +998,20 @@ static struct hci_conn *__hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t conn->mtu = hdev->le_mtu ? hdev->le_mtu : hdev->acl_mtu; break; case CIS_LINK: - case BIS_LINK: - case PA_LINK: /* conn->src should reflect the local identity address */ hci_copy_identity_address(hdev, &conn->src, &conn->src_type); - /* set proper cleanup function */ - if (!bacmp(dst, BDADDR_ANY)) - conn->cleanup = bis_cleanup; - else if (conn->role == HCI_ROLE_MASTER) + if (conn->role == HCI_ROLE_MASTER) conn->cleanup = cis_cleanup; - conn->mtu = hdev->iso_mtu ? hdev->iso_mtu : - hdev->le_mtu ? hdev->le_mtu : hdev->acl_mtu; + conn->mtu = hdev->iso_mtu; + break; + case PA_LINK: + case BIS_LINK: + /* conn->src should reflect the local identity address */ + hci_copy_identity_address(hdev, &conn->src, &conn->src_type); + conn->cleanup = bis_cleanup; + conn->mtu = hdev->iso_mtu; break; case SCO_LINK: if (lmp_esco_capable(hdev)) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index f20c826509b6..03328c1dd090 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -7001,14 +7001,9 @@ static void hci_le_big_sync_established_evt(struct hci_dev *hdev, void *data, continue; } - if (ev->status != 0x42) { + if (ev->status != 0x42) /* Mark PA sync as established */ set_bit(HCI_CONN_PA_SYNC, &bis->flags); - /* Reset cleanup callback of PA Sync so it doesn't - * terminate the sync when deleting the connection. - */ - conn->cleanup = NULL; - } bis->sync_handle = conn->sync_handle; bis->iso_qos.bcast.big = ev->handle; diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index 73fc41b68b68..6e76798ec786 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -6999,7 +6999,7 @@ static void create_pa_complete(struct hci_dev *hdev, void *data, int err) hci_dev_lock(hdev); - if (!hci_conn_valid(hdev, conn)) + if (hci_conn_valid(hdev, conn)) clear_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags); if (!err) -- cgit v1.3-3-g829e From 485e0626e58768f3c53ba61ab9e09d6b60a455f4 Mon Sep 17 00:00:00 2001 From: Luiz Augusto von Dentz Date: Thu, 6 Nov 2025 13:05:35 -0500 Subject: Bluetooth: hci_event: Fix not handling PA Sync Lost event This handles PA Sync Lost event which previously was assumed to be handled with BIG Sync Lost but their lifetime are not the same thus why there are 2 different events to inform when each sync is lost. Fixes: b2a5f2e1c127 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event") Signed-off-by: Luiz Augusto von Dentz --- include/net/bluetooth/hci.h | 5 +++++ net/bluetooth/hci_event.c | 49 ++++++++++++++++++++++++++++++++------------- 2 files changed, 40 insertions(+), 14 deletions(-) diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 8d0e703bc929..cb4c02d00759 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -2783,6 +2783,11 @@ struct hci_ev_le_per_adv_report { __u8 data[]; } __packed; +#define HCI_EV_LE_PA_SYNC_LOST 0x10 +struct hci_ev_le_pa_sync_lost { + __le16 handle; +} __packed; + #define LE_PA_DATA_COMPLETE 0x00 #define LE_PA_DATA_MORE_TO_COME 0x01 #define LE_PA_DATA_TRUNCATED 0x02 diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 03328c1dd090..3838b90343d9 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -5843,6 +5843,29 @@ static void hci_le_enh_conn_complete_evt(struct hci_dev *hdev, void *data, le16_to_cpu(ev->supervision_timeout)); } +static void hci_le_pa_sync_lost_evt(struct hci_dev *hdev, void *data, + struct sk_buff *skb) +{ + struct hci_ev_le_pa_sync_lost *ev = data; + u16 handle = le16_to_cpu(ev->handle); + struct hci_conn *conn; + + bt_dev_dbg(hdev, "sync handle 0x%4.4x", handle); + + hci_dev_lock(hdev); + + /* Delete the pa sync connection */ + conn = hci_conn_hash_lookup_pa_sync_handle(hdev, handle); + if (conn) { + clear_bit(HCI_CONN_BIG_SYNC, &conn->flags); + clear_bit(HCI_CONN_PA_SYNC, &conn->flags); + hci_disconn_cfm(conn, HCI_ERROR_REMOTE_USER_TERM); + hci_conn_del(conn); + } + + hci_dev_unlock(hdev); +} + static void hci_le_ext_adv_term_evt(struct hci_dev *hdev, void *data, struct sk_buff *skb) { @@ -7046,29 +7069,24 @@ static void hci_le_big_sync_lost_evt(struct hci_dev *hdev, void *data, struct sk_buff *skb) { struct hci_evt_le_big_sync_lost *ev = data; - struct hci_conn *bis, *conn; - bool mgmt_conn; + struct hci_conn *bis; + bool mgmt_conn = false; bt_dev_dbg(hdev, "big handle 0x%2.2x", ev->handle); hci_dev_lock(hdev); - /* Delete the pa sync connection */ - bis = hci_conn_hash_lookup_pa_sync_big_handle(hdev, ev->handle); - if (bis) { - conn = hci_conn_hash_lookup_pa_sync_handle(hdev, - bis->sync_handle); - if (conn) - hci_conn_del(conn); - } - /* Delete each bis connection */ while ((bis = hci_conn_hash_lookup_big_state(hdev, ev->handle, BT_CONNECTED, HCI_ROLE_SLAVE))) { - mgmt_conn = test_and_clear_bit(HCI_CONN_MGMT_CONNECTED, &bis->flags); - mgmt_device_disconnected(hdev, &bis->dst, bis->type, bis->dst_type, - ev->reason, mgmt_conn); + if (!mgmt_conn) { + mgmt_conn = test_and_clear_bit(HCI_CONN_MGMT_CONNECTED, + &bis->flags); + mgmt_device_disconnected(hdev, &bis->dst, bis->type, + bis->dst_type, ev->reason, + mgmt_conn); + } clear_bit(HCI_CONN_BIG_SYNC, &bis->flags); hci_disconn_cfm(bis, ev->reason); @@ -7182,6 +7200,9 @@ static const struct hci_le_ev { hci_le_per_adv_report_evt, sizeof(struct hci_ev_le_per_adv_report), HCI_MAX_EVENT_SIZE), + /* [0x10 = HCI_EV_LE_PA_SYNC_LOST] */ + HCI_LE_EV(HCI_EV_LE_PA_SYNC_LOST, hci_le_pa_sync_lost_evt, + sizeof(struct hci_ev_le_pa_sync_lost)), /* [0x12 = HCI_EV_LE_EXT_ADV_SET_TERM] */ HCI_LE_EV(HCI_EV_LE_EXT_ADV_SET_TERM, hci_le_ext_adv_term_evt, sizeof(struct hci_evt_le_ext_adv_set_term)), -- cgit v1.3-3-g829e From cd8dbd9ef600435439bb0e70af0a1d9e2193aecb Mon Sep 17 00:00:00 2001 From: Max Chou Date: Wed, 5 Nov 2025 20:02:04 +0800 Subject: Bluetooth: btrtl: Avoid loading the config file on security chips For chips with security enabled, it's only possible to load firmware with a valid signature pattern. If key_id is not zero, it indicates a security chip, and the driver will not load the config file. - Example log for a security chip. Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a lmp_ver=0c lmp_subver=8922 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: btrtl_initialize: key id 1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin Bluetooth: hci0: RTL: cfg_sz 0, total sz 71301 Bluetooth: hci0: RTL: fw version 0x41c0c905 - Example log for a normal chip. Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a lmp_ver=0c lmp_subver=8922 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: btrtl_initialize: key id 0 Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_config.bin Bluetooth: hci0: RTL: cfg_sz 6, total sz 71307 Bluetooth: hci0: RTL: fw version 0x41c0c905 Tested-by: Hilda Wu Signed-off-by: Nial Ni Signed-off-by: Max Chou Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btrtl.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index 1d4a7887abcc..52794db2739b 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -50,7 +50,7 @@ #define RTL_CHIP_SUBVER (&(struct rtl_vendor_cmd) {{0x10, 0x38, 0x04, 0x28, 0x80}}) #define RTL_CHIP_REV (&(struct rtl_vendor_cmd) {{0x10, 0x3A, 0x04, 0x28, 0x80}}) -#define RTL_SEC_PROJ (&(struct rtl_vendor_cmd) {{0x10, 0xA4, 0x0D, 0x00, 0xb0}}) +#define RTL_SEC_PROJ (&(struct rtl_vendor_cmd) {{0x10, 0xA4, 0xAD, 0x00, 0xb0}}) #define RTL_PATCH_SNIPPETS 0x01 #define RTL_PATCH_DUMMY_HEADER 0x02 @@ -534,7 +534,6 @@ static int rtlbt_parse_firmware_v2(struct hci_dev *hdev, { struct rtl_epatch_header_v2 *hdr; int rc; - u8 reg_val[2]; u8 key_id; u32 num_sections; struct rtl_section *section; @@ -549,14 +548,7 @@ static int rtlbt_parse_firmware_v2(struct hci_dev *hdev, .len = btrtl_dev->fw_len - 7, /* Cut the tail */ }; - rc = btrtl_vendor_read_reg16(hdev, RTL_SEC_PROJ, reg_val); - if (rc < 0) - return -EIO; - key_id = reg_val[0]; - - rtl_dev_dbg(hdev, "%s: key id %u", __func__, key_id); - - btrtl_dev->key_id = key_id; + key_id = btrtl_dev->key_id; hdr = rtl_iov_pull_data(&iov, sizeof(*hdr)); if (!hdr) @@ -1070,6 +1062,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, u16 hci_rev, lmp_subver; u8 hci_ver, lmp_ver, chip_type = 0; int ret; + int rc; + u8 key_id; u8 reg_val[2]; btrtl_dev = kzalloc(sizeof(*btrtl_dev), GFP_KERNEL); @@ -1180,6 +1174,14 @@ next: goto err_free; } + rc = btrtl_vendor_read_reg16(hdev, RTL_SEC_PROJ, reg_val); + if (rc < 0) + goto err_free; + + key_id = reg_val[0]; + btrtl_dev->key_id = key_id; + rtl_dev_info(hdev, "%s: key id %u", __func__, key_id); + btrtl_dev->fw_len = -EIO; if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev == 0x000c) { snprintf(fw_name, sizeof(fw_name), "%s_v2.bin", @@ -1202,7 +1204,7 @@ next: goto err_free; } - if (btrtl_dev->ic_info->cfg_name) { + if (btrtl_dev->ic_info->cfg_name && !btrtl_dev->key_id) { if (postfix) { snprintf(cfg_name, sizeof(cfg_name), "%s-%s.bin", btrtl_dev->ic_info->cfg_name, postfix); -- cgit v1.3-3-g829e